FM Antenna: Dipol 1/RUZ B (omnidirectional)
Code: A0210
Antenna amplifier with three inputs and two outputs, designed for home TV installations. The 12VDC 100 mA (output) stabilized power supply is included in the set.
Code: B1025
This product is no longer available

Four-input antenna amplifier for home TV installations. The 12V/100 mA (output) stabilized power supply with RF/DC separator is included in the set. The amplifier is fed through the same coaxial cable which transmits the signal from the amplifier to the receiver.
Code: B11551
This product is no longer available

Amplifier for small community antenna installations (MATV systems). Having two UHF inputs, it eliminates in many cases the need of employing antenna diplexer. Solid housing protects the amplifier against external interferences.
Code: B11583
This product is no longer available

The amplifier can improve FM reception in low-signal areas. It is an ideal device for cooperation with majority of the offered FM antennas. 75 ohm input/output impedance, compliance with CE standards.
Code: B9013
€6.06
Available

A multiplexer, used as combiner or branching filter which sums up signals from four antennas, to be installed on a mast near the antenna set. The quadplexer is designed for working outdoors. Construction of the casing protects the device from water. Simple installation thanks to plastic mount. Optio...
Code: C0330
This product is no longer available

A diplexer, used as combiner or branching filter which sums up signals from two antennas, to be installed on a mast near the antenna set. The diplexer is designed for working outdoors. Construction of the casing protects the device from water. Simple installation thanks to plastic mount. Optional pr...
Code: C0365
This product is no longer available - zobacz zamienniki

This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
Code: D0010
€2.33
Available

TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
Code: E1015_1
€0.65
Available

It is solid, compact mount made of 4 mm thick structural steel section and welded pipe, with coating from white powder paint. Plastic cap prevents water from getting into the pipe. The support has been designed to mount Yagi antennas to a wall or balcony.
Code: E8681
This product is no longer available

Solid, compact mount made of structural steel section (4mm thick) and welded pipe, with coating from white powder paint. Plastic cap prevents water from getting into the pipe. The support has been designed for mounting Yagi antennas to a wall or balcony. Weight - 0.97 kg.
Code: E8682
This product is no longer available

Code: E903820
This product is no longer available - zobacz zamienniki

The device has been designed to amplify FM-VHF I (1 input), VHF III (1 input), and UHF (2 inputs) bands. The amplifier features high output signal level (115 dBuV). Each input of the amplifier has built-in attenuator, and allows to power a preamplifier (short-circuit protection). The device is equip...
Code: R821101
This product is no longer available - zobacz zamienniki

The AM-407 amplifier has been designed for outdoor use as a mast device. It is used for signal amplification to a level required by several receivers. It can be fed from typical 24 V / 100 mA power supply with RF/DC separator. Feeding from another amplifiers providing power through the coax cable is...
Code: R903031
This product is no longer available