FM Antenna: Dipol 1RUZ PM B (omnidirectional H+V)
Code: A0221
Antenna amplifier with three inputs and two outputs, designed for home TV installations. The 12VDC 100 mA (output) stabilized power supply is included in the set.
Code: B1025
This product is no longer available

Four-input antenna amplifier for home TV installations. The 12V/100 mA (output) stabilized power supply with RF/DC separator is included in the set. The amplifier is fed through the same coaxial cable which transmits the signal from the amplifier to the receiver.
Code: B11551
This product is no longer available

Amplifier for small community antenna installations (MATV systems). Having two UHF inputs, it eliminates in many cases the need of employing antenna diplexer. Solid housing protects the amplifier against external interferences.
Code: B11583
This product is no longer available

The amplifier can improve FM reception in low-signal areas. It is an ideal device for cooperation with majority of the offered FM antennas. 75 ohm input/output impedance, compliance with CE standards.
Code: B9013
€6.06
Available

A multiplexer, used as combiner or branching filter which sums up signals from four antennas, to be installed on a mast near the antenna set. The quadplexer is designed for working outdoors. Construction of the casing protects the device from water. Simple installation thanks to plastic mount. Optio...
Code: C0330
This product is no longer available

A diplexer, used as combiner or branching filter which sums up signals from two antennas, to be installed on a mast near the antenna set. The diplexer is designed for working outdoors. Construction of the casing protects the device from water. Simple installation thanks to plastic mount. Optional pr...
Code: C0365
This product is no longer available - zobacz zamienniki

This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
Code: D0010
€2.33
Available

TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
Code: E1015_1
€0.65
Available

It is solid, compact mount made of 4 mm thick structural steel section and welded pipe, with coating from white powder paint. Plastic cap prevents water from getting into the pipe. The support has been designed to mount Yagi antennas to a wall or balcony.
Code: E8681
This product is no longer available

Solid, compact mount made of structural steel section (4mm thick) and welded pipe, with coating from white powder paint. Plastic cap prevents water from getting into the pipe. The support has been designed for mounting Yagi antennas to a wall or balcony. Weight - 0.97 kg.
Code: E8682
This product is no longer available

Code: E903820
This product is no longer available - zobacz zamienniki

The DTT MCA101T TERRA masthead correction amplifier is dedicated to work with OTF30x transmitters
• Dedicated to work with TERRA's OTF30x optical transmitters
• Frequency converter
• Automatic Gain Control (AGC) circuit to ensure signal stability
• Built-in LTE700 filter
• Remote DC power supply
• Capable of outdoor mounting
Code: R82101
€91.03
Available

The device has been designed to amplify FM-VHF I (1 input), VHF III (1 input), and UHF (2 inputs) bands. The amplifier features high output signal level (115 dBuV). Each input of the amplifier has built-in attenuator, and allows to power a preamplifier (short-circuit protection). The device is equip...
Code: R821101
This product is no longer available - zobacz zamienniki

ALCAD's CAD-824 programmable multiband channel amplifier is designed for SMATV antenna systems for receiving DVB-T2 digital terrestrial television.
• Amplifier dedicated for SMATV antenna systems
• 4 VHF+UHF inputs, 1 FM input
• Auto-configuration function
• DC feeding for preamplifiers 12 - 24 V
• High selectivity with 32 filters
• High gain with AGC
• Converter function
• Excellent output signal quality
• Easy installation and configuration
Code: R82620
€251.06
Available

The AM-407 amplifier has been designed for outdoor use as a mast device. It is used for signal amplification to a level required by several receivers. It can be fed from typical 24 V / 100 mA power supply with RF/DC separator. Feeding from another amplifiers providing power through the coax cable is...
Code: R903031
This product is no longer available

Masthead antenna amplifier AM-346 dedicated for RF systems powered by 24 VDC.
• Supply voltage 24 V
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
Code: R903046
€20.50
€22.78
- 10%
Previous lowest price: €20.50
Available