UHF TV DVB-T/T2 Antenna: DIPOL 44/21-48 Tri Digit
Code: A2670
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
Top-quality F-connector Platinum for use on TRISET-113 coax. The connector has been designed to ensure watertightness both from the side of the cable and the device.
• Compression connector
• For Triset-113 cable
• Water-tight (protection of the cable against water penetration)
• Log-life, insensitivity to temperature changes
• For Triset-113 cable
• Water-tight (protection of the cable against water penetration)
• Log-life, insensitivity to temperature changes
F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.
• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
First-class precisely made coaxial antenna plug. Full shielding of the device prevents penetration of interference into the antenna installation. The plug fits the common IEC standard antenna sockets.
• IEC plug
• High quality
• Full shielding
• High quality
• Full shielding
F socket connector - antenna plug.
• F socket - IEC antenna plug transition
Outdoor three-input antenna branching filter, used as triplexer for combining signals from three antennas, installed on the mast carrying the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. Simple installation thanks to convenient plastic tie...
• Combining signals from three antennas
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
The Signal LTE700 filter (R49601) is used for TV/SAT systems and can filter unwanted signals in the 700 MHz band.
• Attenuation of LTE700 signals (band > 694 MHz).
• Very steep slope of attenuation curve on the band boundary
• Very steep slope of attenuation curve on the band boundary