EN
PL
CZ
DE
IE
HU
PT
RO
SK
Optical LNB LWO102 4F31 E 1 × 4 dBm FP 1310 nm TERRA
Code: A3033
The coaxial cable attenuation equalizer 4 dB EQF041 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 15 m line extension
• 4 dB attenuation compensation
• 15 m line extension
• 4 dB attenuation compensation
The coaxial cable attenuation equalizer 8 dB EQF081 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 30 m line extension
• 8 dB attenuation compensation
• 30 m line extension
• 8 dB attenuation compensation
The coaxial cable attenuation equalizer 12 dB EQF121 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 45 m line extension
• 12 dB attenuation compensation
• 45 m line extension
• 12 dB attenuation compensation
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
![Satellite dish DIPOL DPL-120 + stub [dark graphite, RAL7016]](https://www.dipolnet.com/img/thumbnails/a9684+.jpg/380d7369ec3d0738a2ae514cef5c6779.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
