English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
LNB: LWB202L Wideband LO 10,41 GHz TERRA
Code: A98210
The coaxial cable attenuation equalizer 4 dB EQF041 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 15 m line extension
• 4 dB attenuation compensation
• 15 m line extension
• 4 dB attenuation compensation
The coaxial cable attenuation equalizer 8 dB EQF081 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 30 m line extension
• 8 dB attenuation compensation
• 30 m line extension
• 8 dB attenuation compensation
The coaxial cable attenuation equalizer 12 dB EQF121 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 45 m line extension
• 12 dB attenuation compensation
• 45 m line extension
• 12 dB attenuation compensation
The OTF302 6F55 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1550 nm wavelength (transmission window III).
• FP type laser
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The SRM522 R80522 cascadable single-cable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line a...
• New! Multiswitch for systems with Unicable receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
The programmable SRM-584 R80580 multiswitch has four pairs of Legacy /dSCR + DTT outputs. In dSCR mode, the outputs allow for independent operation of up to 32 SAT dSCR receivers/STBs, fed in via two coaxial cables (16+16, default configuration) or via one coaxial cable (32 from one output in Unicab...
• Multiswitch compatible with Unicable I/II tuners
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC circuit
• Active terrestial path
• Built-in LNB-type switch: Quatro and WideBand
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC circuit
• Active terrestial path
• Built-in LNB-type switch: Quatro and WideBand
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
The programmable SRM-564 R80564 multiswitch has three pairs of Legacy /dSCR +DTT outputs. The single-cable dSCR/Unicable mode enables distribution from each pair of up to 32 independent satellite channels (Unicable II) plus terrestrial signals with the use of ordinary satellite splitters operating i...
• Multiswitch designed to work with Unicable I/II receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in RTV/SAT circuit
• Built-in LNB switch for selecting wideband or quatro LNB - reduced number of input cables
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• In dynamic mode, allows to split signal do max. 32 receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in RTV/SAT circuit
• Built-in LNB switch for selecting wideband or quatro LNB - reduced number of input cables
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• In dynamic mode, allows to split signal do max. 32 receivers
The programmable SRM-524 R80524 multiswitch has one pair of Legacy /dSCR + DTT outputs. The outputs allow in dSCR mode for independent operation of up to 32 SAT dSCR receivers/STBs, fed in via two coaxial cables (16+16, default configuration) or via one coaxial cable (32 from one output in Unicable ...
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
