EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
LNA169-5G 24dB in-cabinet antenna amplifier with 5G LTE filter, shielded
Code: B4008
Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 100 mA.
• Type: transformer
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• Power supply: AC 13 V/20 mA
• TV output: IEC plug
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 100 mA.
• Type: transformer-based
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12 VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12 VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
The power supply is designed to supply DC 12 V to terrestrial TV antenna amplifiers and preamplifiers with a current consumption of up to 300 mA.
• Type: pulsed
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: AC 230 V 50 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• TV output: IEC plug
• Cable connection: F-type connector
