EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [1 m]
Code: E1015_1
Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
The monolithic nickel-plated brass F-connector is designed for TRISET cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
M IEC 113 MASTER compression connector for Triset-113 cable.
• Connector type: IEC male
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
IEC 113 MASTER compression F socket for Triset-113 cable.
• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The insulation stripper is a high-quality, multi-purpose tool used to prepare coaxial cables for the application of connectors.
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
4-channel 8 Mpix (7 fps) DVR, WizSense, with perimeter protection with object classification (1 channel), face recognition (1 channel), 4 x SMD+.
• Recording at up to 8 Mpix at 7 fps, 5 Mpix at 12 fps
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input/output bandwidth - 64 Mbps
• Supports up to 8 IP cameras up to 8 Mpix (without IVS support)
• Supports 1 SATA drive up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports artificial intelligence-based functions: perimeter protection with object classification (1 channel), face recognition (1 channel), metadata from analysis,
• Smart Motion Detection+ (SMD+) on 4 channels.
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input/output bandwidth - 64 Mbps
• Supports up to 8 IP cameras up to 8 Mpix (without IVS support)
• Supports 1 SATA drive up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports artificial intelligence-based functions: perimeter protection with object classification (1 channel), face recognition (1 channel), metadata from analysis,
• Smart Motion Detection+ (SMD+) on 4 channels.
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range via coaxial cable up to 500 m at 100 Mbps
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
16-channel 2 Mpix (15 fps) DVR, WizSense, with perimeter protection with object classification (2 channels), face recognition (2 channels), SMD+.
• Recording in resolution up to 2 Mpix at 15 fps
• 16 Analog HD channels
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input / output bandwidth - 128 Mbps
• Supports up to 24 IP cameras up to 8 Mpix (without IVS support)
• Supports two SATA drives up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports AI-based functions: perimeter protection with object classification (2 channels), face recognition (2 channels), metadata analysis
• Smart Motion Detection+ (SMD+)
• POS terminal support
• 1 x USB 3.0, 1 x USB 2.0
• 1 x I/O / 1 x audio output
• 16 Analog HD channels
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input / output bandwidth - 128 Mbps
• Supports up to 24 IP cameras up to 8 Mpix (without IVS support)
• Supports two SATA drives up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports AI-based functions: perimeter protection with object classification (2 channels), face recognition (2 channels), metadata analysis
• Smart Motion Detection+ (SMD+)
• POS terminal support
• 1 x USB 3.0, 1 x USB 2.0
• 1 x I/O / 1 x audio output
8 Mpix (7 fps), WizSense, with perimeter protection with object classification (2 channels), face recognition (2 channels), 8 x SMD+.
• Recording in resolution up to 8 Mpix at 7 fps, 5 Mpix at 12 fps
• 8 Analog HD channels with camera menu control
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input bandwidth of 128 Mbps
• Supports up to 16 IP cameras up to 8 Mpix
• Supports 1 SATA drive up to 10 TB
• Supported H.265 (+) / H.264 (+) compression
• Supports functions based on artificial intelligence: perimeter protection with object classification (2 channels), face recognition (2 channels), metadata from analysis
• Smart Motion Detection+ (SMD+)
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
• 8 Analog HD channels with camera menu control
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input bandwidth of 128 Mbps
• Supports up to 16 IP cameras up to 8 Mpix
• Supports 1 SATA drive up to 10 TB
• Supported H.265 (+) / H.264 (+) compression
• Supports functions based on artificial intelligence: perimeter protection with object classification (2 channels), face recognition (2 channels), metadata from analysis
• Smart Motion Detection+ (SMD+)
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
The combo meter ST-6986 measures DVB-S/DVB-S2 (HD) satellite signal, DVB-T/T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S/S2 signals
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
16-channel 8 Mpix (7 fps) DVR, WizSense, with perimeter protection with object classification (8 channels), 16 x SMD+.
• Recording at up to 8 Mpix at 7 fps, 5 Mpix at 12 fps
• Support for up to 32 IP cameras up to 8 Mpix - maximum input bandwidth 128 Mbps
• Supports 1 SATA drive up to 16 TB
• Supports functions based on artificial intelligence: perimeter protection with object classification (8 channels), face recognition (2 channels)
• Intelligent motion detection MD+ (Smart Motion Detection+)
• Support for up to 32 IP cameras up to 8 Mpix - maximum input bandwidth 128 Mbps
• Supports 1 SATA drive up to 16 TB
• Supports functions based on artificial intelligence: perimeter protection with object classification (8 channels), face recognition (2 channels)
• Intelligent motion detection MD+ (Smart Motion Detection+)
32-channel 2 Mpix (15 fps) DVR, WizSense, with perimeter protection with object classification (4 channels), face recognition (2 channels), SMD+.
• Recording in resolution up to 2 Mpix at 15 fps
• 32 Analog HD channels
• Support for up to 32 IP cameras up to 6 Mpix (without IVS support) - maximum input bandwidth - 128 Mbps
• Perimeter protection with object classification (2 channels), face recognition (2 channels), SMD+ (on each channel)
• Support for POS terminals
• 32 Analog HD channels
• Support for up to 32 IP cameras up to 6 Mpix (without IVS support) - maximum input bandwidth - 128 Mbps
• Perimeter protection with object classification (2 channels), face recognition (2 channels), SMD+ (on each channel)
• Support for POS terminals
![SCAME 7 mm cable clamp [100 pcs].](https://www.dipol.com.pl/img/thumbnails/e9417+++.jpg/ec8139767991946f15f5f096513cec27.jpg)
The pack contains 100 pieces of brackets for fixing cables.
• Mounting method: nail
• Clamp eye size: 7 mm
• Clamp eye size: 7 mm
The AS07STCA-4K certified signal meter can measure DVB-S/DVB-S2 (4K) satellite signal, DVB-T/T2 (4K) terrestrial TV signal in HEVC 10 Bit compression and C/J.83B/ISDB-T cable signal.
• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• DVB-T2 support with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, CBER, VBER
• Measurement of necessary parameters for digital signal: MER, Link Margin
• Measurement of DVB-S/S2 signals simultaneously from two satellite positions for each of the 8 polarisation/band pairs
• Measurement export to .csv file
• RF signal measurement in the range 20...100 dBμV
• Real-time signal spectrum analyser to detect interference from LTE signals
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• USB interface (possibility of taking a screenshot of the current signal measurement)
• Viewing of the received channel on a 7" TFT-LCD touch-screen display with high 4K resolution
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Constellation chart
• Large Li-On 7.4 V/7000 mAh battery - sufficient for approx. 3-4 h of continuous operation
• Efficient and easy-to-use user interface
• DVB-T2 support with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, CBER, VBER
• Measurement of necessary parameters for digital signal: MER, Link Margin
• Measurement of DVB-S/S2 signals simultaneously from two satellite positions for each of the 8 polarisation/band pairs
• Measurement export to .csv file
• RF signal measurement in the range 20...100 dBμV
• Real-time signal spectrum analyser to detect interference from LTE signals
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• USB interface (possibility of taking a screenshot of the current signal measurement)
• Viewing of the received channel on a 7" TFT-LCD touch-screen display with high 4K resolution
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Constellation chart
• Large Li-On 7.4 V/7000 mAh battery - sufficient for approx. 3-4 h of continuous operation
• Efficient and easy-to-use user interface
8-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
4-channel Hikvision DVR for up to 2 MP cameras with 2 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x500x200 mm
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
4-channel 8 Mpix (7 fps) DVR, WizSense, with perimeter protection with object classification (1 channel), face recognition (1 channel), 4 x SMD+.
• Recording at up to 8 Mpix at 7 fps, 5 Mpix at 12 fps
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input/output bandwidth - 64 Mbps
• Supports up to 8 IP cameras up to 8 Mpix (without IVS support)
• Supports 1 SATA drive up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports artificial intelligence-based functions: perimeter protection with object classification (1 channel), face recognition (1 channel), metadata from analysis,
• Smart Motion Detection+ (SMD+) on 4 channels.
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
• HDMI / VGA simultaneous outputs (1080p)
• Maximum input/output bandwidth - 64 Mbps
• Supports up to 8 IP cameras up to 8 Mpix (without IVS support)
• Supports 1 SATA drive up to 10 TB
• Supports H.265 (+) / H.264 compression
• Supports artificial intelligence-based functions: perimeter protection with object classification (1 channel), face recognition (1 channel), metadata from analysis,
• Smart Motion Detection+ (SMD+) on 4 channels.
• POS terminal support
• 2 x USB 2.0
• 1 x In / 1 x Out audio
A 16-channel Hikvision DVR for cameras up to 8 MPix, with 8 AcuSense channels. It features universal channels (HD-TVI, AHD, HD-CVI, CVBS and IP).
• Recording of HD-TVI signals at a resolution of 8 Mpix at 8 fps, 5 Mpix (3K) at 12 fps, 3 Mpix at 18 fps, 1080p and lower resolutions at 25 fps
• Supports 16 analogue channels + 16 IP channels (up to 8 Mpix) – supports HD-TVI, AHD and CVBS cameras, as well as Hikvision network cameras and other ONVIF-compliant manufacturers’ cameras.
• Option to replace analogue channels with IP channels on a 1:1 basis (up to 32 IP cameras, each with a resolution of up to 8 MP)
• AI functions: Motion Detection 2.0 (16 channels) or Perimeter Protection (8 channels) or Face Recognition (4 channels)
• AcuSense – alarm filtering with person/vehicle classification
• Image decoding for up to 24 1080p channels at 25 fps.
• Support for the HikConnect cloud
• Supports 16 analogue channels + 16 IP channels (up to 8 Mpix) – supports HD-TVI, AHD and CVBS cameras, as well as Hikvision network cameras and other ONVIF-compliant manufacturers’ cameras.
• Option to replace analogue channels with IP channels on a 1:1 basis (up to 32 IP cameras, each with a resolution of up to 8 MP)
• AI functions: Motion Detection 2.0 (16 channels) or Perimeter Protection (8 channels) or Face Recognition (4 channels)
• AcuSense – alarm filtering with person/vehicle classification
• Image decoding for up to 24 1080p channels at 25 fps.
• Support for the HikConnect cloud
