EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1 m]
Code: E1017_1
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
The monolithic nickel-plated brass F-connector is designed for TRISET cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
M IEC 113 MASTER compression connector for Triset-113 cable.
• Connector type: IEC male
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
IEC 113 MASTER compression F socket for Triset-113 cable.
• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The insulation stripper is a high-quality, multi-purpose tool used to prepare coaxial cables for the application of connectors.
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
The LTE700 filter with 24 V Signal DC pass-through is used in RTV/SAT TV installations and is used to filter out unwanted signals in the 700 MHz band.
• LTE700 signal attenuation (band > 694 MHz)
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
• 24 V DC pass-through
• Very steep slope of attenuation characteristics at the band edge
![SCAME 7 mm cable clamp [100 pcs].](https://www.dipol.com.pl/img/thumbnails/e9417+++.jpg/ec8139767991946f15f5f096513cec27.jpg)
The pack contains 100 pieces of brackets for fixing cables.
• Mounting method: nail
• Clamp eye size: 7 mm
• Clamp eye size: 7 mm
