• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
• Smooth attenuation adjustment from 3 dB to 18 dB
• DC pass-through max. 500 mA
• Two adjustable cable cutters: RG-59, RG-6, TRISET
• Insulation stripping tool for telephone or computer cables
• Cable cutter for cutting cables
• Blade can be replaced
