Cable Tester (RJ-45, RJ-11)
Code: N7055
The (Scotchlok) UY2 double quick connector allows you to connect wires without stripping.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
Crimping tool for 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11) modular plugs.
• For 8P8C (RJ-45), 6P6C (RJ-12), 6P4C (RJ-11) connectors
• Insulation cutter and stripper
• Built-in back-movement lock mechanism
• Insulation cutter and stripper
• Built-in back-movement lock mechanism
Combination impact torque tool for installing telecommunication cables.
Male RJ-45 connector (8P8C) category 5 for UTP/FTP cables (with solid wires), used for computer computer network cables.
The coupler is designed for connecting two Cat5e cables terminated with RJ-45 plugs. It is equipped with two 8P8C sockets.
The NETSET F/UTP CAT 5e is the finest-quality twisted pair cable designed for professional data transmission systems inside buildings.
• Cable type: F/UTP
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
• Category 5e
• Applications: indoor
• PVC sheath
• Core diameter 0.5 mm (24 AWG)
• Sold by the meter
Crimping tool for Bell 8-pin plugs and modular plugs (twisted pair cables).
• Crimping tool for 8P8C (RJ-45) modular plugs
The FS8117 cable tester allows to test UTP/STP cables: cable quality, attenuation, length, distance to failure, short-circuit, improperly crimped connectors, Ping test, correct connection to the router, PoE voltage test, scan of active IPs in the network. Precision inductive probe – high power pair ...
• Tested cable types: CAT 5, 5e, 6, 7 twisted pair (UTP/STP), telephone, coaxial
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port
• Cable length testing
• Function - "find port" quick port search on network devices
• Cable search and testing in PoE mode (passive PoE)
• Pair integrity test
• PoE wire voltage measurement
• Auto shutdown at idle
• Battery low indicator
• Recording of measurement results in the device memory
• "Find port" function - quick port search in network devices
• PING test
• IP Scan
• Quick identification of the connected network port