Terra SA-51D Class A amplifier for 5-input multiswitches
Code: R70511
Switching-mode power supply PS182F 18 V 2 A for Terra MS/MSV multiswitches
To cart Preview

Switching-mode power supply PS182F 18 V 2 A for Terra MS/MSV multiswitches

The PS182F 2 A 18 V switched-mode power supply is designed for TERRA's MRP and MV/MS multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
Code: R71465
€25.43
Available
SA-51 Class A Terra amplifier for 5-input multiswitches
To cart Preview

SA-51 Class A Terra amplifier for 5-input multiswitches

The SA-51 amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier with power supply
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
Code: R70501
€183.97
Available
Multiswitch MV-508 Terra Class A, 5-input 8-output with IF gain control
To cart Preview

Multiswitch MV-508 Terra Class A, 5-input 8-output with IF gain control

Multiswitch MV508 5 in/8 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 8 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Code: R70708
€105.79
Available
Multiswitch MV-512 Terra Class A, 5-input 12-output with IF gain control
To cart Preview

Multiswitch MV-512 Terra Class A, 5-input 12-output with IF gain control

Multiswitch MV512 5 in/12 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 12 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening effectiveness.
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Code: R70712
€134.90
Available
Multiswitch MV-516 Terra Class A, 5-input 16-output with IF gain control
To cart Preview

Multiswitch MV-516 Terra Class A, 5-input 16-output with IF gain control

Multiswitch MV516 5 in/16 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 16 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Code: R70716
€166.05
Available
Multiswitch MV-524 Terra Class A, 5-input 24-output with IF gain control
To cart Preview

Multiswitch MV-524 Terra Class A, 5-input 24-output with IF gain control

Multiswitch MV524 5 in /24 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 24 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80 m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Code: R70724
€284.60
Available
Multiswitch MV-532 Terra Class A, 5-input 32-output with IF gain control
To cart Preview

Multiswitch MV-532 Terra Class A, 5-input 32-output with IF gain control

Multiswitch MV532 5 in/32 out multiswitch without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• MV multiswitch series for SMATV systems
• Single satellite + DVB-T/T2 signals
• 32 subscriber outlets
• Allows you to build flexible installations
• Top class equipment
• The cast iron casing ensures high screening efficiency
• Switches instead of traditional potentiometers (more stable settings)
• High output signal level - up to 80m cables to sockets
• Grouping of outputs according to gain
• Built-in pre-correction of cable attenuation characteristics
• Local or remote power supply
• Practically zero failure rate
• Free SatNet software for network design
Code: R70732
€338.37
Available
RACK board ZMB-1-800 side mount unit for 800 enclosure
To cart Preview

RACK board ZMB-1-800 side mount unit for 800 enclosure

The ZMB-1-800 side-mounting unit is used for vertical mounting of equipment. It is mounted on the front and rear RACK rails (left or right).
• Enables installation of multiswitch components in a RACK cabinet
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
Code: R77105
€29.51
Available
RACK board ZMD-1 - front assembly for MR-xxx, MV-xxx Terra
To cart Preview

RACK board ZMD-1 - front assembly for MR-xxx, MV-xxx Terra

Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
Code: R77311
€23.61
Available
Switching-mode power supply SIGNAL 2 A 18 V for multiswitches
To cart Preview

Switching-mode power supply SIGNAL 2 A 18 V for multiswitches

The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
Code: R71455
€11.13
Available