EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
TV/SAT tap SD-520 Terra class A
Code: R70518
MULTISWITCH MR908 9 in/8 out multiswitch with power supply and active/ passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• 9/8 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
MR912 9 in/12 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• 9/12 multiswitch for radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
MR916 9 in/16 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-performance radial multiswitch for 16-slot installation
• Capable of connecting up to 8 PVR outlets
• 4 year warranty
• High output level of SAT and DVB-T/T2 signals
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Capable of feeding a preamplifier into a terrestrial TV antenna
• Open casing guaranteeing high level of shielding - class A
• Capable of connecting up to 8 PVR outlets
• 4 year warranty
• High output level of SAT and DVB-T/T2 signals
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Capable of feeding a preamplifier into a terrestrial TV antenna
• Open casing guaranteeing high level of shielding - class A
MR508 5 in/8 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR512 5 in/12 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The MR516 5 in/16 out multiswitch with power supply and active terrestrial TV path is dedicated for small and medium-sized installations with RTV/SAT signal distribution.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The SA-91L amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
The SA-91DL amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
The SA-51 amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier with power supply
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The SA-51 amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier without power supply
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
SD-510 taps with 10 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
SD-515 tap with 15 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
The ZMB-1-800 side-mounting unit is used for vertical mounting of equipment. It is mounted on the front and rear RACK rails (left or right).
• Enables installation of multiswitch components in a RACK cabinet
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
