EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
5/32 Multiswitch: Terra MR-532 (active terrestrial path, class A)
Code: R70632
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
SD-510 taps with 10 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
SD-515 tap with 15 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
SD-520 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
The SDQ-508 splitter is used in multiswitch installations to divide the signal from the multiswitch bus into 4 subnetworks.
• Dividing the multiswitch bus into 4 tracks
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
MR508 5 in/8 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 8 single outlets or 4 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR512 5 in/12 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations.
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals.
• Capable of distributing signals to 12 single outlets or 6 PVR receivers.
• Armoured casing guaranteeing high level of shielding - class A.
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
The MR516 5 in/16 out multiswitch with power supply and active terrestrial TV path is dedicated for small and medium-sized installations with RTV/SAT signal distribution.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 16 single outlets or 8 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
MR524 5 in/24 out multiswitch with power supply and active terrestrial TV path dedicated for small and medium-sized installations with distribution of RTV/SAT signals.
• High-end device dedicated to small, collective TV/SAT installations
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
• Distribution of satellite, terrestrial TV and radio signals
• Capable of distributing signals to 24 single outlets or 12 PVR receivers
• Armoured casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• High signal separation on inputs and outputs
• Grouping of outputs by gain - easier installation
• Separation between inputs greater than 30 dB
• Possibility to supply preamplifier in DVB-T/T2 antenna
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB.
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
