English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
5/24 Multiswitch: Terra MV-524 (IF gain adjustment, class A)
Code: R70724
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The splitter is used in multiswitch installations to extend the signal bus, consisting of four satellite lines that carry signals from a Quatro LNB and terrestrial line with DVB-T, DAB, FM signals, into four branches/subnetworks. The device is equipped with two DC-transition switches that in "ON" po...
• Sub-network partition (4 branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
• MV series for SMATV systems
• Signals fom one satellite + DVB-T
• 8 outputs
• Scalability
• Top quality
• Die-cast housing provides high screening efficiency
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• Groups of outputs with different output levels
• Built-in compensation of cable attenuation
• Remote or local power supply
• Exceptional reliability
• Free SatNet software for network planning
• Signals fom one satellite + DVB-T
• 8 outputs
• Scalability
• Top quality
• Die-cast housing provides high screening efficiency
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• Groups of outputs with different output levels
• Built-in compensation of cable attenuation
• Remote or local power supply
• Exceptional reliability
• Free SatNet software for network planning
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
• Signals from one satellite + DVB-T/DAB/FM
• 32 outputs
• Small size
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• 32 outputs
• Small size
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
Side assembly component ZMB-1-800 R77105 is used for mounting devices vertically in a RACK cabinet with detachable side walls. The component is mounted to the front and rear RACK rail (on the left or right side of the cabinet). The component is suitable for mounting in standing 600 x 800 mm RACK cab...
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• For mounting series of Terra multiswitches of MR/MV series in RACK cabinets
• Front-mounted
• Made of PA11 aluminum
• Color: black
• Front-mounted
• Made of PA11 aluminum
• Color: black
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
