English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
9/8 Multiswitch: TERRA MV-908L (active terr. path, class A, w/o PSU)
Code: R70858
The SA-91L R70901 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals.
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
Small and powerful AC/DC adapter dedicated for multiswitch systems. The power supply does not have a separate ON/OFF switch.
Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, for applications in medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/12 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
The splitter is used in multiswitch installations to extend 9-cable systems into two subnetworks (18 outputs). The splitter is equipped with DC-pass switch that in "ON" position runs current through "H" lines to both branches. In "OFF" position it takes place only within one branch.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary with lower attenuation and the secondary with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of signal levels in ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the main (pass-through) branch with low attenuation and the tap branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary (pass-through) branch with low attenuation and the secondary (tap) branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The splitter is used in multiswitch installations to extend 9-cable systems into four subnetworks (36 outputs). The splitter is equipped with DC-pass switches that in "ON" position run current through "H" lines to selected branches.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into four subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into four subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
Small and powerful AC/DC adapter dedicated for multiswitch systems. The power supply does not have a separate ON/OFF switch.
The SA-91L R70901 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals.
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
The SA-91DL R70911 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals. The device is used as interstage...
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, for applications in medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/16 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
Terra multiswitches of MV series have been designed for medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/24 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency
Terra multiswitches of MV series have been designed for medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/32 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• For mounting series of Terra multiswitches of MR/MV series in RACK cabinets
• Front-mounted
• Made of PA11 aluminum
• Color: black
• Front-mounted
• Made of PA11 aluminum
• Color: black
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
