TERRA multiswitch MV-916L class A, 9-in, 16-out multiswitch with active terrestrial - without power supply
Code: R70866
The SA-91L amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
The PS182F 2 A 18 V switched-mode power supply is designed for TERRA's MRP and MV/MS multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
Multiswitch MV908 9 in/8 out without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 8 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 8 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
TERRA multiswitch MV-912L class A, 9-input, 12-output with active terrestrial - without power supply
Multiswitch MV912 9in/12output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 12 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 12 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
The SD-904 splitter is used in multiswitch installations to split the signal from the multiswitch bus into 2 subnetworks.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
SD-910 tap with 10 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
SD-915 taps with 15 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
SD-920 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 20 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 20 dB
• Armoured casing guaranteeing high level of screening - class A
The SDQ-908 splitter is used in multiswitch installations to divide the signal from the multiswitch bus into 4 subnetworks.
• 8 track SAT + terrestrial TV splitter
• Split into 4 subnetworks
• Replaces 9 single TV/SAT splitters
• Has the ability to turn on/off the DC pass-through
• Armoured casing guaranteeing high level of shielding - class A
• Split into 4 subnetworks
• Replaces 9 single TV/SAT splitters
• Has the ability to turn on/off the DC pass-through
• Armoured casing guaranteeing high level of shielding - class A
The PS182F 2 A 18 V switched-mode power supply is designed for TERRA's MRP and MV/MS multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F-plug
• Recommended for MRP, MS and MV series multiswitches
The SA-91L amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as: LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers
• Cast housings guaranteeing a high level of shielding - Class A
The SA-91DL amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• IF signal boosting and levelling for 8 polarisation-band pairs
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
• DVB-T/T2 and radio signal boosting and levelling
• LTE signal attenuation (band > 790 MHz)
• Compensation of attenuation characteristics of coaxial cable
• Powering other elements of the installation, such as LNBs, DVB-T/T2 preamplifiers, multiswitches or other bus amplifiers (in the case of connecting 18 V DC power supply)
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV924 9in/24output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 24 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 24 outputs
• Built-in pre-correction of cable characteristics
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
Multiswitch MV-932L TERRA Class A, 9-input, 32-output with active terrestrial - without power supply
Multiswitch MV932 9 in/32 output without power supply and active terrestrial TV path dedicated for medium and large installations with distribution of RTV/SAT signals.
• Radial multiswitch
• 32 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
• 32 outputs
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Open casing guaranteeing high level of shielding - class A
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
• AC input 100...240 V, 50/60 Hz
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches
• DC output 18 V, 2 A
• Output: F plug
• Recommended for MRP, MS and MV series multiswitches