EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Terra SRM-564 pass-through multiswitch with active FM/DAB/DVB-T path and built-in AGC - Class A Digital SCR/Unicable system
Code: R80564
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB.
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
The SA004 TERRA amplifier is designed to compensate for losses introduced by cables in wideband SAT IF networks.
• Broadband amplifier designed for WideBand installations
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
The 1>2F Signal satellite splitter allows the signal to be split into 2 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 2 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
The 1>6F Signal satellite splitter allows the signal to be split into 6 subnetworks in the 5-2400 MHz band.
• Splitting signals into 6 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
Low-noise LWB202L Wideband LO 10.41 GHz satellite converter dedicated to SAT installations.
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The ORF302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
