EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Terra pass-through multiswitch SRM-581 (290...2340 MHz) with AGC - Class A with active TV path Digital SCR/Unicable
Code: R80581
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The PC102W programmer is a device designed to configure and manage TERRA multiswitches based on the dSCR/Unicable system.
• Programmer is used to configure and manage dSCR/Unicable TERRA multiswitches
• Wireless access via WiFi from any device - tablets, smartphones, laptops, computers
• Quick and intuitive configuration using a web browser
• Wireless access via WiFi from any device - tablets, smartphones, laptops, computers
• Quick and intuitive configuration using a web browser
![Satellite dish TRX-EL 110 FAMAVAL [graphite]](https://www.dipol.com.pl/img/thumbnails/a9659+.jpg/b26cc5ba4823f8d4c061c5d7be913473.jpg)
The 119 cm x 110 cm FAMAVAL 110 TRX EL steel satellite dish has excellent reception characteristics.
• Size: 110 cm
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
• Material: steel
• Resistant to strong winds
• Gain max. 41.2 dBi
The SA004 TERRA amplifier is designed to compensate for losses introduced by cables in wideband SAT IF networks.
• Broadband amplifier designed for WideBand installations
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
• Amplification 14...24 dB
• Constant current pass max. 20 V/1.5 A
• F-type connectors
• Open housing
The HSA001R6 is a satellite amplifier with an active terrestrial TV path equipped with a passive return channel.
• Strengthening of terrestrial and satellite TV signals
• DiSEqC and DC voltage transmission possible
• Adjustable gain for each TV channel
• Open casing inside a compact plastic housing
• DiSEqC and DC voltage transmission possible
• Adjustable gain for each TV channel
• Open casing inside a compact plastic housing
The 1>2F Signal satellite splitter allows the signal to be split into 2 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 2 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 4 dB
The 1>4F Signal satellite splitter allows the signal to be split into 4 subnetworks in the 5-2400 MHz band.
• Splitting signals into 4 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
The 1>8F Signal satellite splitter allows the signal to be divided into 8 subnetworks in the 5-2400 MHz band.
• Split TV-SAT signal on 8 tracks
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
• Operating bandwidth 5 - 2400 MHz
• DC pass-through between outputs and input
• Attenuation of I/O 14 dB
The PS202F 2 A 20 V switched-mode power supply is designed for TERRA dSCR multiswitches, equipped with an F connector.
• AC input 180...240 V, 50 Hz
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
• DC 20 V, 2 A output
• Output: F-plug
• Recommended for dSCR/Unicable series multiswitches
The ZMB-1-800 side-mounting unit is used for vertical mounting of equipment. It is mounted on the front and rear RACK rails (left or right).
• Enables installation of multiswitch components in a RACK cabinet
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
• Side mounting allows to save space in the rack
• Dedicated to Terra MV series multiswitches
• Material: aluminium PA11
• Colour: black
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• Enables installation of multiswitch components in a RACK cabinet
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
• Front mounted
• Dedicated to Terra MR series multiswitches
• Material: aluminium PA11
• Colour: black
