English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Power Supply: TERRA UP413 (12V/4.5A, for Terra modules)
Code: R82533
The TERRA mo418 4D31 R82522 optical transmitter is used for transmission of television signals via optical medium. It converts input electrical signals within 47-2400 MHz range, fed with coaxial cable, into optical signal. The power of the optical signal is +++6 dBm (4 mW)+++, which is sufficient fo...
The TERRA mo428 4D31 R82523 optical transmitter is used for transmission of television signals via optical medium. It converts input electrical signals within 47-2400 MHz range, fed with coaxial cable, into optical signals. The power of the optical signal at each of the two independent optical outpu...
The HDR-60-12 power supply is dedicated for Terra channel amplifiers, transmodulators and IP Terra streamers mounted on universal DIN rail.
• 12 VDC power supply
• 4.5 A output current
• Dedicated for channel amplifiers, transmodulators and TERRA IP streamers
• Mounted on universal DIN rail in RACK cabinets
• 4.5 A output current
• Dedicated for channel amplifiers, transmodulators and TERRA IP streamers
• Mounted on universal DIN rail in RACK cabinets
• A 12 V power supply for TERRA modules,
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
• Current capacity: 4.5 A,
• DIN rail mounting,
• Distribution cables for passing supply voltage between adjacent modules included in the kit.
The ribbon supply cable 699.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 36 mm.
• The 699.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 36 mm
The ribbon supply cable 780.20 is used to distribute power between panels of transmodulators, TERRA IP streamers with a width of 48.5 mm.
• The 780.20 ribbon cable is used to distribute power between panels of TERRA devices
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
• It allows transmission of 12 VDC between 4 devices
• Designed to connect devices with a width of 48 mm
Universal DIN rail mounting bracket matching 19-inch RACK cabinets. Height: 1U, color: white.
• Universal DIN rail for RACK cabinets
• Height: 1U
• Color: white
• Height: 1U
• Color: white
The 699.026 R82540 bridge is used for signal links between the outputs and inputs of adjacent modules (of at420 R82510, ma400 R82520 amplifiers and mt420 R82515 modulators). It has two F-male fast connectors.
The ZMC-1 R77210 component is a EURO TH35 rail with a length of 380 mm, receding by 100 mm in relation to the front of the RACK cabinet. The element is made of hard aluminum (PA11) sheet with 2 mm thickness.
• Allows to mount different types of equipment in RACK cabinet
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
The ZMD-35 R77335 component is a EURO TH35 rail with length of 430 mm recessed by 100 mm from the front of the RACK cabinet. The component is made of hard PA11 aluminum sheet with thickness of 2 mm. The ZMD-35 can be loaded with evenly distributed devices with a total weight of 12 kg. The set includ...
Terra ma420 is a top class amplifier of FM, VHF, and UHF signals.
• Three independent amplification paths for FM, VHF/DAB, UHF
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
• Built-in crossover
• Smooth gain control -15...0 dB
• Additional attenuator -10 dB
• Power supply for preamplifiers DC 12V 0.1A
• Gain 30dB
• Maximum signal level of IMD3 VHF 116
The sdi416 IPTV streamer is a device that enables the conversion of DVB-S2X/S2/S signals to IP multicast streams at a maximum rate of 1.2 Gbps.
• Conversion of DVB-S2X/S2/S signals (uncoded programs) to IP stream
• Support for single-cable standard dSCR/Unicable (EN50494, EN50607)
• Conversion of about 200 programs from 16 satellite transponders (1 panel)
• USB connector for playback of source material in .ts format
• IP multicast stream at maximum rate of 1.2 Gbps – low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
• Support for single-cable standard dSCR/Unicable (EN50494, EN50607)
• Conversion of about 200 programs from 16 satellite transponders (1 panel)
• USB connector for playback of source material in .ts format
• IP multicast stream at maximum rate of 1.2 Gbps – low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
The sdi482c IPTV streamer is a device that enables the conversion of a DVB-S2X/S2/S signal (coded channels) into an IP multicast stream with a maximum bandwidth of 0.6 Gbps.
• Conversion of DVB-S2X/S2/S signals (coded programs) to IP stream
• 2 CI slots
• Reception of DVB-S2X/S2/S signal from 8 satellite transponders
• Support single-cable dSCR/Unicable standard (EN50494, EN50607)
• USB connector enabling playback of source material in .ts format
• IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
• 2 CI slots
• Reception of DVB-S2X/S2/S signal from 8 satellite transponders
• Support single-cable dSCR/Unicable standard (EN50494, EN50607)
• USB connector enabling playback of source material in .ts format
• IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
The sti441C streamer enables conversion of DVB-T/T2/C signals from 4 multiplexes to IP standard (multicast) with a maximum throughput of 200 Mbps.
• Conversion of 4xDVB-T/T2/C signals to IP stream
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
