EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Modulator ST-6990 HDMI – HDMI - 4xCOFDM (DVB-T)/4xQAM (DVB-C) – four channel
Code: R86704
DIPOL 19/21-60 DIGITAL is a 19-element antenna designed for reception of digital DVB-T/T2 television signals in UHF band in horizontal H polarization.
• Band 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarisation
• Directional radiation pattern
• Number of elements: 19
• Gain max. 14 dBi
• H polarisation
• Directional radiation pattern
• Number of elements: 19
The monolithic F-connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 cable family
The insulation stripper is a high-quality, multi-purpose tool used to prepare coaxial cables for the application of connectors.
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
The Signal R-3 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal split into three channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-8 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into eight channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-6 signal splitter splits CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into six tracks
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The Signal R-2 signal splitter splits CATV signals in the 5-1000 MHz band.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
