SIGNAL 19" RACK Cabinet (24U 600x800mm, standing)
Code: R912012
Shelf for mounting in a 19" rack cabinet (depth: 800 mm, e.g. R912013, R912014). It is used to place various devices that do not comply with 19" rack standard, e.g. 9/12 multiswitch TERRA MSV-912 R70862.
Front-mounted single-side shelf for 19" rack cabinets (depth: 254 mm).
Front-mounted single-side shelf for 19" rack cabinets (depth: 356 mm).
Combination lock designed for use in any standing Signal RACK cabinet. The lock can be opened by selecting the programmed 3-digit code or with key.
Front-mounted single-side shelf for 19" rack cabinets (depth: 457 mm).
The sliding shelf allows mounting of equipment/accessories that require easy access for configuration/connecting purposes, such as a keyboard or CCTV DVR.
The panels bridge 1U gaps between devices mounted in RACK cabinets.
The panels bridge 2U gaps between devices mounted in RACK cabinets.
The panels bridge 3U gaps between devices mounted in RACK cabinets.
The panels bridge 4U gaps between devices mounted in RACK cabinets.
The fan panel is used for forced ventilation of devices placed in a rack cabinet. It is mounted to the angles of the cabinet. The panel incorporates three R912026 fans. 230 VAC supply voltage is connected via the included power cord.
The fan panel is used for forced ventilation of devices placed in a rack cabinet. It is mounted to the angles of the cabinet. The panel incorporates two R912026 fans. 230 VAC supply voltage is connected via the included power cord.
The RACK fan provides airflow so as to move heat out of the RACK cabinet.
• 3 fans for efficient cooling of the cabinet interior
• Fits all types of RACK cabinets
• 1U height, butt mount
• Power supply 230 VAC, built-in on/off switch
• Fits all types of RACK cabinets
• 1U height, butt mount
• Power supply 230 VAC, built-in on/off switch
The fan module is used for forced ventilation of devices placed in a SIGNAL standing rack cabinet. It is mounted in the ceiling of the cabinet. The module incorporates four R912026 fans.
Cable organizer for RACK cabinets, with 7 cable holders.
Horizontal cable organizer for 19-inch RACK.
The base is used to attach a standing SIGNAL RACK cabinet (WxD: 600x800 mm) to the floor. In addition, it can store spare cable lengths. The height of the base is 10 cm.
230 VAC power strip with 9 outlets, for mounting in 19" RACK cabinets
230VAC power strip for 19-inch RACK cabinet, with 9 outlets and common switch.
The panel simplifies cable management and helps keep the equipment inside the rack cabinet free of dust and dirt.
The panel is a concentrator of structural cabling (FTP cat. 5e). The device is to be mount in 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of 75 ohm coaxial cables. For example, it allows for a systematic layout of cables coming from security cameras to a DVR. The device is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of structural cabling (UTP cat. 5e). The device is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of structural cabling (75 ohm coaxial cables). It allows for a systematic layout of cables coming from a headend, set of RF amplifiers etc. to the distribution network. The device is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of structural cabling (UTP cat. 6). The piece of equipment is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of structural cabling (UTP cat. 5).
• Height: 2U
• 48 CAT5 RJ45 ports
• Color: black
• 48 CAT5 RJ45 ports
• Color: black
The panel is a concentrator of structural cabling (UTP cat. 5e). The device is to be mounted in a 19" RACK cabinet (e.g. R912012, R912014, R912015, R912018, R912020, R912021, R912022).
The panel is a concentrator of structural cabling (UTP cat. 5e). The device is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of structural cabling (FTP cat. 6). The device is to be mounted in a 19" RACK cabinet (e.g. R912012, R912014, R912015, R912018, R912020, R912021, R912022).
The panel is a concentrator of structural cabling (UTP cat. 6). It is to be mounted in a 19" RACK cabinet (e.g. R912020, R912021, R912022).
The panel is a concentrator of telephone cabling. The device is to be mounted in a 19" RACK cabinet (e.g. R912012, R912014, R912015, R912018, R912020, R912021, R912022).
The panel is a concentrator of telephone cabling. The device is to be mounted in a 19" RACK cabinet (e.g. R912012, R912014, R912015, R912018, R912020, R912021, R912022).
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• For mounting series of Terra multiswitches of MR/MV series in RACK cabinets
• Front-mounted
• Made of PA11 aluminum
• Color: black
• Front-mounted
• Made of PA11 aluminum
• Color: black
Front assembly component ZMD-2 R77322 is composed of two elements. It is used to mount the devices in a RACK cabinet vertically, 100 mm behind the front 19" rails. This is a universal model. The holes needed to mount a device should be drilled according to needs. The set includes eight screws with c...
The ZMD-35 R77335 component is a EURO TH35 rail with length of 430 mm recessed by 100 mm from the front of the RACK cabinet. The component is made of hard PA11 aluminum sheet with thickness of 2 mm. The ZMD-35 can be loaded with evenly distributed devices with a total weight of 12 kg. The set includ...