SFP Transceiver: ULTIMODE SFP-203M (two single-mode fibers up to 20 km)

Code: L1411
€7.25
Price Disc. Quantity Validity
€7.25 0 % from 1 piece
Available
ULTIMODE SFP-203M cooperates with two single-mode fibers transmitting data at speeds up to 155 Mb/s. The maximum transmission distance is 20 km...
• Duplex transmission with the use of two single-mode fibers,
• Transmission speed up to 155 Mb/s (IEEE 802.3u 100Base-FX),
• Transmission range up to 20 km,
• LC optical connectors.

Warranty

3-year warranty.

Support

Details

ULTIMODE SFP-203M cooperates with two single-mode fibers transmitting data at speeds up to 155 Mb/s. The maximum transmission distance is 20 km.
ULTIMODE optical modules are compliant with SFP (Small Form-factor Pluggable) standard. ULTIMODE SFP-203M cooperates with two single-mode fibers transmitting data at speeds up to 155 Mb/s, over distances up to 20 km.
SFP modules of ULTIMODE series are equipped with LC connectors. The main advantages of LC connectors are a small size (possibility of dense packing) and a snap locking system for protection against accidental disconnection.
The ULTIMODE modules cooperate with media converters and majority of switches and routers with SFP slots (also with CISCO equipment) compatible with IEEE 802.3u 100Base-FX standard.
The use of media converters with the possibility of exchanging SFP modules is particularly advantageous when it comes to network configuration changes. Instead of replacing the entire unit/s, it is sufficient to exchange the SFP transceiver/s.
Distinguishing features
  • duplex transmission with the use of two single-mode fibers,
  • transmission speed up to 155 Mb/s (IEEE 802.3u 100Base-FX),
  • transmission range up to 20 km,
  • LC optical connectors.
We also offer Fast Ethernet SFP module cooperating with multimode fibers, with transmission range up to 550 m - L1401.
Fast Ethernet modules L1401 and L1411 are not compatible with Gigabit media converter M-100G/SFP L1301.
GbE ULTIMODE SFP transceivers:
Aside from Fast Ethernet SFP modules we offer Gigabit SFP modules supporting 802.3z 1000Base-FX standard and cooperating with ULTIMODE M-100G/SFP L1301 media converters:
Name: SFP-023G SFP-2-3G SFP-203/5G SFP-205/3G
Code: L1405 L1415 L1416 L11417
Type of optical fiber: multimode single-mode
Transmission range: 2 km 20 km
Transmission speed: 1.25 Gb/s 1.25 Gb/s
Wavelength (Tx/Rx): 1310/1310 nm
1310/1550 nm
1550/1310 nm
Connectors: 2x LC 2x LC 1x SC 1x SC

Specifications

Product type SFP module
Brand ULTIMODE
Name SFP-203M
Module type SFP
Transmission type Duplex – 2 fibers
Fiber optic type Single-mode
speed MBps 100
connector type LC/PC duplex
Maximum transmission range km 20
wavelength Tx nm 1310
Rx nm 1310
Transmitter power dBm -15...-3
Receiver sensitivity dBm > -32
Power supply DCV 3.3 (from SFP port)
Operating temperature °C 0...+70