EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
This range includes components necessary for building local LAN networks based on copper cabling (twisted-pair cable) and wireless technology. The offer includes both, standard switches and industrial switches. Selected models feature PoE function that allows to power network devices via twisted-pair cable. PoE switches can be used in video surveillance systems (PoE supply for cameras) and to supply power to access points.
Access points together with WLAN antennas allow to build radio links operating in 2.4 GHz or 5 GHz band in 802.11n and 802.11ac standards.
The offer is complemented by a range of accessories dedicated for building IP networks, including RJ45 connectors and sockets as well as UTP patchcords.
Access points together with WLAN antennas allow to build radio links operating in 2.4 GHz or 5 GHz band in 802.11n and 802.11ac standards.
The offer is complemented by a range of accessories dedicated for building IP networks, including RJ45 connectors and sockets as well as UTP patchcords.
A versatile tool designed to facilitate the installation, configuration and maintenance of CCTV systems and computer networks.
• A scratch-resistant, high-brightness 5.4" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Ability to display images from up to 32 cameras simultaneously
• Capability to digitally zoom in on camera images
• Capability to record video and capture still images from cameras (memory card required)
• HDMI and VGA signal inputs – capability to display images from the recorder
• Wi-Fi support (2.4 GHz)
• Touch-sensitive function buttons
• Signal tester for video, audio, data, network, Wi-Fi and PoE
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Supports microSD cards up to 128 GB
• Built-in torch
• Power output: DC 12 V / 3 A, PoE (802.3af/at)
• A high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Ability to display images from up to 32 cameras simultaneously
• Capability to digitally zoom in on camera images
• Capability to record video and capture still images from cameras (memory card required)
• HDMI and VGA signal inputs – capability to display images from the recorder
• Wi-Fi support (2.4 GHz)
• Touch-sensitive function buttons
• Signal tester for video, audio, data, network, Wi-Fi and PoE
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Supports microSD cards up to 128 GB
• Built-in torch
• Power output: DC 12 V / 3 A, PoE (802.3af/at)
A versatile tool designed to facilitate the installation, configuration and maintenance of CCTV systems and computer networks.
• A scratch-resistant, high-brightness 7" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 57.72 Wh battery (11.1 V, 5200 mAh) providing up to approx. 11 hours of operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Capable of simultaneously displaying footage from up to 32 cameras
• Capable of performing digital zoom (8x) on camera footage
• Ability to record video and capture still images from cameras to the built-in memory
• HDMI input and output – ability to display the image from the recorder and connect an external monitor
• Wi-Fi support (2.4 GHz)
• Physical function buttons
• Tester for video, audio, data, network, Wi-Fi and PoE signals
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Built-in internal memory: 8 GB, supports microSD cards up to 128 GB
• Built-in torch
• Power output: 2 x DC 12 V / 3 A, DC 24 V / 2 A, PoE (802.3af/at/bt90), DC 5 V / 2 A (USB)
• A high-capacity 57.72 Wh battery (11.1 V, 5200 mAh) providing up to approx. 11 hours of operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Capable of simultaneously displaying footage from up to 32 cameras
• Capable of performing digital zoom (8x) on camera footage
• Ability to record video and capture still images from cameras to the built-in memory
• HDMI input and output – ability to display the image from the recorder and connect an external monitor
• Wi-Fi support (2.4 GHz)
• Physical function buttons
• Tester for video, audio, data, network, Wi-Fi and PoE signals
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Built-in internal memory: 8 GB, supports microSD cards up to 128 GB
• Built-in torch
• Power output: 2 x DC 12 V / 3 A, DC 24 V / 2 A, PoE (802.3af/at/bt90), DC 5 V / 2 A (USB)
The Signal NT-48 is a professional, multi-function tester designed for the installation, diagnosis and maintenance of telecommunications and IT cabling. The device combines the functions of a cable tester, cable locator, cable length measurer, Ethernet port locator and PoE tester.
• Digital cable location
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch
• Support for UTP and STP cables
• RJ45 cable pin sequence test
• Open circuit detection
• Short circuit detection between wires
• Detection of incorrectly crossed wires
• RJ45 connector crimping check
• Cable length measurement using the TDR method
• Measurement of the length of individual pairs
• Switch or router port location
• 100 Mb/s / 1 Gb/s connection recognition
• PoE power diagnostics
• PoE voltage measurement
• Identification of pairs used for power supply
• Determination of power polarity
• Measurement of PoE power whilst under load
• Non-contact voltage detection (NCV)
• Distinguishing between live and neutral wires
• LED torch
Signal TR-10 1–10 RJ45 terminator set for the Signa NT-48 N7048 tester.
• Set of 10 RJ45 terminators
• Identification markings 1–10
• Designed for use with the Signal NT-48 tester
• Enables identification of the terminus of the cable under test
• Compatible with the UTP cabling test function
• Can be used during the diagnosis of multiple network lines
• Useful for acceptance testing and servicing of structured cabling systems
• Quick identification of cables between the rack and end sockets
• Allows several terminators to be left at various points in the installation and subsequent tests to be carried out from a single location
• Identification markings 1–10
• Designed for use with the Signal NT-48 tester
• Enables identification of the terminus of the cable under test
• Compatible with the UTP cabling test function
• Can be used during the diagnosis of multiple network lines
• Useful for acceptance testing and servicing of structured cabling systems
• Quick identification of cables between the rack and end sockets
• Allows several terminators to be left at various points in the installation and subsequent tests to be carried out from a single location
The connector is used to connect an external antenna to a GPRS/UMTS/LTE/LTE modem in order to strengthen the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to amplify the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Enables connection of an external antenna to a GPRS/UMTS/LTE modem
• List of compatible devices in the data sheet
• List of compatible devices in the data sheet
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Allows connection of external antenna to GPRS/UMTS/LTE modem
The connector is used to connect an external antenna to a GPRS/UMTS/LTE modem in order to strengthen the signal of the mobile operator.
• Allows connection of external antenna to GPRS/UMTS/LTE modem
