English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This category offers, among others, metal accessories for installation of antennas and cabling. Masts designed for installation of TV antennas and telecommunication antennas can be divided into steel masts and aluminum masts. The maximum length of a mast is 3 meters. There is also a range of lattice masts available for taller structures. Mast mounts can be used to install the mast to a wall or chimney. Depending on the version, antenna brackets can be mounted on balustrades or walls.
The range of housings and junction boxes includes, among others: metal, flush-mounted, surface mounted indoor housings designed for the installation of devices and accessories for various types, as well as metal sealed housings with increased tightness class. The range of the is complemented by TV mounts dedicated for mounting TV sets on walls.
The range of housings and junction boxes includes, among others: metal, flush-mounted, surface mounted indoor housings designed for the installation of devices and accessories for various types, as well as metal sealed housings with increased tightness class. The range of the is complemented by TV mounts dedicated for mounting TV sets on walls.
Sealed box designed for mounting to the pole or wall. Designed for CCTV systems. A mounting plate and two DIN rails are provided inside the box.
• Designed for CCTV systems
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• The box can be mounted on a pole or wall
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mountable on a wall or pole
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
The mount has been designed for placing Signal waterproof installation boxes on poles with diameters from 40 to 60 mm.
• For placing waterproof installation boxes on poles with diameters from 40 to 60 mm
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
The mount has been designed for placing waterproof installation boxes on poles with diameters from 40 to 60 mm. The rear wall of R90602 210/230/145 box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, the M5 screws go wit...
The mount is designed for placing installation boxes on poles with diameters from 40 to 60 mm. The rear wall of a box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, 2 U-bolts, and M5 screws with seals and washers. The f...
Pole mount for waterproof boxes.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
Mast mount for sealed boxes 210/230/145 for pole mounting.
• Mounting of sealed boxes to a pole
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
The cabinet is made of corrosion-resistant aluminum and designed both for indoor and outdoor use.
Waterproof cabinet designed for a mast or wall mounting, with a mounting plate inside.
• Made of aluminum, corrosion resistant
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
Signal Signal LP42-22DT E93113 mount has been designed to place a modern LCD/LED/OLED television/monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
• Screen size range: 23''... 42''
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
Signal LP42-44DT E93115 mount has been designed to place a modern LCD/LED/OLED television or monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) between -10 to +5 degrees.
• Screen size range: 32''... 55''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
The Signal LP42-46DT E93117 mount has been designed to place a modern LCD/LED television or monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
• Screen size range: 37"...70''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
Signal LP42-44ST E93125 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -10 to 0 degrees.
• Screen size range: 32''... 55''
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
Signal PLB-40E E93132 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 45 kg. Due to a special design, the rear of a TV/monitor is only 19 mm from the wall.
• Screen size range: 32'' - 55''
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
Signal LPA36-443A E93163 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -20 to 10 degrees. It is also possible to rotate the panel horizontally (+...
• New! Universal LCD/LED/OLED wall mount
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
The LPA49-466 wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... -90”
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
The LP59-46T wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... 80”
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
The KMA20-220 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The KMA20-221 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The KMA20-223 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
Signal LDA18-112N E93361 bracket has been designed to place a modern LCD/LED monitor or small television on a wall. Its load capacity is 15 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of -12° to 8° degrees. It is also possible to rotate the panel horizon...
• Screen size range: 13"... 27"
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
The Signal PLB-CE946-02L E93524 mount has been designed for mounting modern flat LCD/LED/OLED monitor/television (with diagonal from 37" to 70") on a ceiling. Its load capacity is 50 kg. The mount allows horizontal rotation (360 degrees) and adjustment of tilt in the range of 0o to -25
• Screen size range: 37''...70''
• Tilt adjustment: 0o ... -25o
• Horizontal rotation: 360o
• Distance from ceiling (to the middle of the screen): 1060 mm ... 1560 mm
• Load capacity: 50 kg
• VESA: 200x200, 400x200, 300x300, 400x400, 600x400
• Tilt adjustment: 0o ... -25o
• Horizontal rotation: 360o
• Distance from ceiling (to the middle of the screen): 1060 mm ... 1560 mm
• Load capacity: 50 kg
• VESA: 200x200, 400x200, 300x300, 400x400, 600x400
