EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Signal RACK assembly instructions video. Signal cabinets are designed for mounting devices with 19-inch rack mount housings.
€146.22
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €146.22 | 0 % | from 1 piece |
Available
A cabinet designed for the installation of equipment with a 19" enclosure. Used as a termination point for building structured cabling.
• Rack type: wall-mounted
• Rack height: 12U
• Height: 630 mm
• Dimension: 570 mm
• Depth: 600 mm
• Colour: RAL9004 black
• Rack height: 12U
• Height: 630 mm
• Dimension: 570 mm
• Depth: 600 mm
• Colour: RAL9004 black
Details
A cabinet designed for the installation of equipment with 19" enclosures. Ideal for the installation of both professional and non-professional versions of headends.
The enclosure can also accommodate non-RACK-19" equipment, such as RTV-SAT multiswitches and amplifiers, modulators and recorders. Rack-mounted shelves should be used for this.
The rack cabinet has many openings ensuring adequate air circulation. Additionally, it is possible to install fans to increase the ventilation.
Non-rack devices can be mounted on the four-point mounted shelves R912030, with a depth of 600 mm.
To ground the cabinet, the grounding connector should be connected to a ground system through the R912003 set.
Self-assembly kit. All parts are shipped in single cardboard box (600x530x170 mm).
The self-assembling time is typically less than 10 minutes.
The self-assembling time is typically less than 10 minutes.
Key features:
- height:
- 12U
- depth:
- 600 mm
- width:
- capacity of cabinet:
- 60 kg
- assembly in approximately 10 min.
- cable hole:
- in the rear wall
- from above
- from below
- ventilation openings:
- in side walls
- in doors
- removable side walls
- latches in side walls
- removable cover in rear wall
- possible to install the door as a right or left-hand door
- cabinet is packed in one box
- front door is lockable with handle and lock
- six keys included
- four rack rails for mounting devices (two at the front, two at the back)
- possibility to change the spacing between front and rear rails
- numbered clearances (1U) on the mounting rails
- grounding connection
- possibility to mount two fans R912026
- wall mounting using:
- cabinet mounting bracket R912027 (not included)
- hooks (not included in the set)
- 570 mm
Distinguishing features of the original hanging SIGNAL RACK cabinet
 The side panels are blocked with special fixtures |  The safety of the equipment mounted inside is improved by the locks in the side panels |
 The cabinet has four rails with adjustable depth. Their spacing is determined by the size of the mounted devices. |  Openings in the lower and upper parts of the cabinet ensure good ventilation |
 The top of the cabinet has openings for cables and fans |  The bottom of the cabinet also has openings for cables |
 The front door is equipped with a lockable handle |  All the components of the cabinet are packed in a single cardboard box |
KOMAG INSTITUTE OF MINING TECHNOLOGY confirmed
the compliance with international standards.
the compliance with international standards.
 |  |
Document confirming the compliance of the cabinet with general safety requirements contained in Chapter II of the General Product Safety Directive (2001/95/EC) of 3 December 2001 and in the guidelines of the EN 60950-1:2007 international standard, issued by KOMAG INSTITUTE OF MINING TECHNOLOGY.
RACK cabinet configuration tool
We offer a simple mechanism that provides a list of compatible accessories for the selected RACK cabinet. Simply click on the button below.
The new window shows the list of compatible accessories:
The simple configuration tool for RACK cabinets
Specifications
| Product | RACK cabinet 19" 12U 600 mm hanging | ||
| Product code | R912022 | ||
| Product type | RACK cabinet | ||
| RACK standard | 19' | ||
| type | Hanging | ||
| Brand | SIGNAL | ||
| Applications | indoor | ||
| Dimensions | Height | U | 12 |
| Dimensions | Height | mm | 630 |
| Depth | mm | 600 | |
| Width | mm | 570 | |
| Compliance | Directive 2001/95/EC, PN-EN 60950-1:2007 | ||
| Material | Steel | ||
| Color | RAL9004 (black) | ||
| Rack load | kg | 60 | |
| Estimated installation time | min. | 10 | |
| Specific properties | |||
| Door | front | Glazed | |
| Door | back | Cover | |
| left/right door installation | Yes | ||
| Side walls | removable | Yes | |
| Side walls | Lock | Yes | |
| Back wall | removable cover | Yes | |
| Mounting rails | number | pcs. | 4 |
| Handle type | Handle with lock | ||
| Number of keys included | 6 | ||
| Grounding connector | Yes | ||
| U unit marking on RACK rails | marker | Yes | |
| U unit marking on RACK rails | number | No | |
| Seating functionalities | wall mounting possibility | Yes | |
| Seating functionalities | possibility to mount castors | No | |
| castors included | No | ||
| feet included | No | ||
| plinth mounting option | No | ||
| Packing size | carton 1 | mm | 670 × 600 × 180 |
| Holes for cables | in the back wall | Yes | |
| Holes for cables | in side walls | No | |
| In the ceiling | Yes | ||
| In the floor | Yes | ||
| Ventilation holes | in the back wall | No | |
| Ventilation holes | in side walls | Yes | |
| In the ceiling | Yes | ||
| In the floor | No | ||
| in the door | Yes | ||
| Holes for fans | mm | 105 × 105 (2 piece) | |
| Weight | kg | 26 | |
