SIGNAL 19" Rack Cabinet (6U 600mm, hanging)

Code: R912017
Price Disc. Quantity Validity
€113.88 0 % from 1 piece
Cabinet designed to mount devices with 19" standard housing Used as termination sites for building structured cabling.
• Rack type: hanging
• Rack height: 6U
• Height: 360 mm
• Width: 570 mm
• Depth: 600 mm
• Color: RAL9004 black


5-year warranty.



This rack cabinet is suitable for mounting all sorts of devices in standard 19" rack housings. Ideal for installing headends.
The cabinet can also house devices that are not in standard 19" rack housings, for example multiswitches, RF amplifiers, modulators, DVRs, servers. For this purpose the user should mount additional shelf/shelves available for this cabinet.
Multiple openings ensure adequate air circulation. Additionally, it is possible to install fans to provide forced ventilation.
To ground the cabinet, the grounding connector should be connected to a ground system through the R912003 set.
Self-assembly kit. All parts are shipped in single cardboard box (600x600x170 mm).

The self-assembling time is typically less than 10 minutes.
Distinguishing features:
  • Height
    • 6U
  • Depth:
    • 600 mm
  • Width
    • 570 mm
  • Carrying capacity: 60 kg
  • Self-assembling time ca 10 minutes
  • Holes for cables:
    • in rear panel
    • on top
    • in the bottom
  • Ventilation openings:
    • in side panels
    • in doors
  • Removable side panels
  • Removable cover in rear panel
  • Convertible left/right swing door
  • The kit packed in one cardboard box
  • Front doors with door handle and lock
  • Side panels with locks
  • Six keys
  • Four rack rails for mounting devices (2x front, 2x rear)
    • Possibility to change the spacing between the front and rear rails
  • Marked distances (1U) on mounting rails
  • Grounding connector
  • Possibility to mount two R912026 fans
  • Wall mounting with:
    • mounting bracket for hanging cabinets R912027 (not included)
    • hangers (not included)
Distinguishing features of the original hanging SIGNAL RACK cabinet
The side panels are blocked
with special fixtures
The safety of the equipment mounted inside
is improved by the locks in the side panels
The cabinet has four rails
with adjustable depth.
Their spacing is determined by the size
of the mounted devices.
Openings in the lower and upper parts of the cabinet ensure good ventilation
The top of the cabinet has openings
for cables and fans
The bottom of the cabinet
also has openings for cables
The front door is equipped
with a lockable handle
All the components of the cabinet
are packed in a single cardboard box
the compliance with international standards.
Document confirming the compliance of the cabinet with general safety requirements contained in Chapter II of the General Product Safety Directive (2001/95/EC) of 3 December 2001 and in the guidelines of the EN 60950-1:2007 international standard, issued by KOMAG INSTITUTE OF MINING TECHNOLOGY
RACK cabinet configuration tool
We offer a simple mechanism that provides a list of compatible accessories for the selected RACK cabinet. Simply click on the button below.

The new window shows the list of compatible accessories:
The simple configuration tool for RACK cabinets


Product RACK cabinet 19" 6U 600 mm hanging
Product code R912017
Product type RACK cabinet
RACK standard 19'
type Hanging
Applications indoor
Dimensions Height U 6
Height mm 360
Depth mm 600
Width mm 570
Compliance Directive 2001/95/EC, PN-EN 60950-1:2007
Material Steel
Color RAL9004 (black)
Rack load kg 60
Estimated installation time min. 10
Specific properties
Door front Glazed
back Cover
left/right door installation Yes
Side walls removable Yes
Lock Yes
Back wall removable cover Yes
Mounting rails number pcs. 4
Handle type Handle with lock
Number of keys included 6
Grounding connector Yes
U unit marking on RACK rails marker Yes
number No
Seating functionalities wall mounting possibility Yes
possibility to mount castors No
castors included No
feet included No
plinth mounting option No
Packing size carton 1 mm 560 × 600 × 200
Holes for cables in the back wall Yes
in side walls No
In the ceiling Yes
In the floor Yes
Ventilation holes in the back wall No
in side walls Yes
In the ceiling Yes
In the floor No
in the door Yes
Holes for fans mm 105 × 105 (2 piece)
Weight kg 27