This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Signal MT-11 Multifunctional CCTV Tester (5.4", IP, HD-CVI / AHD / HD-TVI / CVBS, HDMI, PoE)

  2. CCTV
  3. Monitors
Code: M3211
€268.29
Price Disc. Quantity Validity
€268.29 0 % from 1 piece
Available
A versatile tool designed to facilitate the installation, configuration and maintenance of CCTV systems and computer networks.
• A scratch-resistant, high-brightness 5.4" IPS touchscreen that can be used even in direct sunlight
• A high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
• Seamless support for various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
• Quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
• Ability to display images from up to 32 cameras simultaneously
• Capability to digitally zoom in on camera images
• Capability to record video and capture still images from cameras (memory card required)
• HDMI and VGA signal inputs – capability to display images from the recorder
• Wi-Fi support (2.4 GHz)
• Touch-sensitive function buttons
• Signal tester for video, audio, data, network, Wi-Fi and PoE
• TDR reflectometer (locates breaks in UTP cables)
• UTP cable tester
• Supports microSD cards up to 128 GB
• Built-in torch
• Power output: DC 12 V / 3 A, PoE (802.3af/at)
Estore: Library: , , , , , , , ,

Warranty

2-year warranty.

Support

  • Write to us!

Details

The Signal MT-11 is a versatile tool designed to facilitate the installation, configuration and maintenance of CCTV systems and computer networks. The meter is compatible with IP cameras (up to 8K) as well as HD-CVI, HD-TVI, AHD (up to 8 MPix, with OSD menu support and a 16:9 aspect ratio at 5 MPix) and CVBS. Thanks to the monitor’s high resolution of 1920 x 1080 pixels, you can view high-quality images from the cameras, allowing you to fine-tune the most important settings with precision. The large touchscreen and additional control buttons ensure user-friendly operation.
The built-in HDMI IN port allows you to connect an external device, such as a recorder. This enables you to display the image from that device and configure it locally.
The built-in rechargeable battery enables the device to operate for long periods (up to 5 hours) and acts as a power source for other devices, offering the following outputs:
  • DC 12 V / 3 A
  • PoE (802.3 af/at, max 30 W)
Key features:
  • a scratch-resistant, high-brightness 5.4" IPS touchscreen that works even in direct sunlight
  • a high-capacity 24.79 Wh battery (7.4 V, 3350 mAh) providing up to approx. 5 hours’ operation
  • seamless support for various surveillance systems: IP (tools for private protocols such as HIK Test Tool, DH Test Tool, Unv test tool, Tiandy tool, HW Tool, IPC Test, Onvif test tool), HD-CVI, AHD, HD-TVI (support for two-way audio) and CVBS
  • capability to generate a test signal – virtual camera – via the RTSP protocol
  • RS-485 port for controlling PTZ cameras (Pelco-P, Pelco-D and over 30 other protocols)
  • quick search and connection function for IP cameras (automatic subnet matching, option to configure camera parameters)
  • ability to display images from up to 32 cameras simultaneously
  • ability to zoom in digitally on camera images
  • capability to record video and capture still images from cameras (memory card required),
  • HDMI and VGA signal inputs – capability to display images from the recorder
  • Wi-Fi support (2.4 GHz)
  • touch-sensitive function buttons
  • video, audio, data, network, Wi-Fi and PoE signal tester
  • UTP TDR reflectometer (detects cable breaks and short circuits)
  • UTP cable tester
  • creation of test reports in PDF format
  • built-in web browsers
  • support for microSD cards up to 128 GB
  • built-in torch
  • power output: DC 12 V / 3 A, PoE (802.3af/at)
The key functions:
Supported systems
The device supports various types and brands of cameras. The meter is compatible with IP cameras (up to 8 Mpix, automatic subnet adjustment, configurable parameters), as well as with the following systems: HD-CVI, HD-TVI, AHD (up to 8 MPix, 16:9 aspect ratio at 5 MPix) and CVBS.

Tester, TDR reflectometer for UTP cables
Cable tester – RJ-45 cable tester used to check wire continuity, connection integrity, detect terminators and verify network operation at speeds of 1000 Mb/s
RJ-45 TDR Test – cable length measurement, identification of transmission pairs, detection of breaks and assessment of cable quality.
Wi-Fi Tester
Supports 2.4 GHz networks.Displays network data and statistics (frequency, channels, signal strength).





Built-in applications for testing IP cameras and recorders:
  • IPC Test – camera discovery, temporary subnet configuration for detected cameras, DHCP server, ping, option to switch to applications supporting proprietary protocols from Dahua and Hikvision, ONVIF connectivity
  • Applications designed for viewing and configuring devices: Hikvision, Dahua, Uniview, Tiandy
  • Multi Preview – simultaneous preview of 32 cameras
  • RTSP stream player
  • Generation of a virtual test RTSP stream (virtual IP camera)
  • RS-485 data analyser, pan-tilt camera control
  • Built-in web browser
  • Audio output, built-in speaker
  • Ability to save recordings and still images on the device, image recording via HDMI
Net Tool – a suite of network testing tools
  • IP network scanner
  • Port scanner, sending ICMP packets (PING)
  • Rapid IP discovery – displays which IP addresses are in use on the network
  • DHCP server
  • Port flashing – detects which port on a switch is connected
  • Network analysis (connection speed, packet loss, loop detection)
  • Continuous communication test with IP addresses, packet route testing
  • Network calculator
PSE – PoE power tester
Detecting which pairs are carrying power and the voltage level.

Device power supply
Power output: PoE (802.3af/at), DC 2.1/5.5 (12 V, 3 A).

Android 11-based system
Built-in internal storage: 8 GB, supports microSD cards up to 128 GB, apps can be installed.
HDMI input and output
Possibility to display the image from the recorder and connect an external monitor.
Built-in LED torch



Wireless display function
Display images on other devices on the local network using a web browser, without the need to install any add-ons.

Specifications

Model MT-11
Product type CCTV tester
Brand SIGNAL
Color blue
General
Operating system 11, Android
Operation Touchscreen, Function buttons
Network interfaces wired standard RJ-45 10/100/1000 (LAN)
wireless Yes, 2.4 GHz
Battery capacity Wh 24,79 Wh (7,4 V, 3350 mAh)
Display
Type LCD, Touch
Screen type IPS
Matrix size 5,4
Maximum resolution p 1920×1080
IP camera support
resolution maximum MP 8Mpx
Protocols Dahua, Hikvision, Tiandy, Uniview, Onvif
Camera initialisation Yes
Image H.264/H.265 decoding, Recording, Live view, Zoom, Screenshots
Functions restore factory settings, menu call, PTZ control, zarządzanie użytkownikami, change of IP address, password change, changing the camera resolution
Support for Analog HD cameras
HD-CVI Max. rozdz 8Mpx (4K), obsługa 5 Mpix 16:9
HD-TVI 8Mpx (4K)
AHD 8Mpx (4K)
Testing
Network cables Cable test - detection of connection, continuity, maximum transmission speed
Network analysis network analysis (connection speed, packet loss, loop detection), network capacity testing, continuous test of communication with IP addresses, network calculator, IP tools - show occupancy of IP addresses in a subnetwork, DHCP server, port scanner, IP network scanner, communication ports test, traceroute - packet route testing, NET-port Blinking - detection of the connected port on the switch, sending ICMP packets (PING), searching for devices from a specific manufacturer
PoE voltage test PSE - PoE power supply tester, detection on which pairs the power supply is applied and its value
RS-485 Pelco-P, Pelco-D and more than 30 other protocols
Connectors
Power outputs DC DS 12V 3A, PoE (802.3 af/at/bt90, max 90 W), USB 5 V / 2 A
Audio jack 1x input
Ethernet Type RJ-45 1x 10/100/1000Mbps (1 LAN z PoE)
Memory 1x microSD/microSDHC card slot (up to 128 GB)
HDMI 1x HDMI input (4K 30kl/s)
RS485 1x port
BNC 1x port
Others
Power supply Charger DC 12V 1A
battery 24,79 Wh (7,4 V, 3350 mAh
Operating temperature °C -10...55
Permissible humidity % 30..90
Dimensions (S x W x G) mm 183 x 110 x 36
Weight kg 0,43