Single-mode Patch Cord PC-515D (3m, 2xSC-2xLC, G.652D)

Code: L34153
€4.19
Price Disc. Quantity Validity
€4.19 0 % from 1 piece
Available
The PC-515D patch cord consists of two parallel 3-meter long single-mode cables terminated on one side with SC connectors and with LC connectors on the other.

Warranty

3-year warranty.

Support

Details

The PC-515D patch cord consists of two parallel 3-meter long single-mode cables terminated on one side with SC connectors and with LC connectors on the other. LC connectors can be densely packed on the panels of fiber-optic devices, SC connectors are still the most popular optical connectors.
The single-mode optical fiber with low water peak used in the patch cords is compliant with ITU-T G.652.D standard. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.
The optical fibers compliant with ITU-T G.652.D are now among the best standard single-mode fibers on the market. Before introduction of the G.652.D recommendations, optical systems could use one of the three transmission windows with lower attenuation (I: 850 nm, II: 1310 nm, III: 1550 nm). Systems based on optical fibers with reduced peak water can work in the whole band from 1280 nm to 1650 nm.
Key features
  • connectors: 2x SC - 2x LC
  • two single-mode fibers (G.652D)
  • length: 3 m
  • low loss

Specifications

Product type Patchcord
type Duplex
Fiber type Single-mode
Connector type A SC/UPC
Connector type B LC/UPC
Connectors SC/UPC – LC/UPC
Fiber standard G.652D
Brand ULTIMODE
Name PC-515D
Length m 3
Insertion loss (IL) A connector dB < 0.25 (A1, A2)
B connector dB < 0.25 (B1, B2)