EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The Signal Fire AI-12 is a fibre-optic splicer which, thanks to its advanced camera and optical system, enables the most precise positioning of optical fibres.
• 4-year warranty from an Authorised Distributor
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
• Advanced camera and optical system
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the fibre core or cladding
• Touchscreen
• Auto mode capability
• 320x image magnification
• 4-core processor ensuring fast performance
• Minimum fusion time of 6 seconds
• Fast heating element – sealing a 40 mm fusion sleeve takes 15 seconds
• Configuration via a mobile app (Android/iOS)
• Large (5.1-inch) display with adjustable brightness
• Ability to generate splicing reports using a dedicated app (export to XLS)
• Metal casing with rubberised underside
• Approximately 260 sealing and splicing cycles on a single charge
• Battery charging time – approximately 3.5 hours
• Extensive range of accessories
The Sendun SD-9+ fibre optic splicer is designed for splicing optical fibres. It uses position-to-core technology with an auto-focus function.
• 4-year Authorised Distributor Warranty
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
The Signal Fire MC-16 is a multifunctional tool designed to work with optical fibres.
• Multifunctional tool to work with optical fibres
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
The Miller MSAT-5 stripper is a tool designed to make indentations in cable tubes and sheaths without disturbing the optical fibres.
• Applicable for tubes with five diameters, from 1.9 mm to 3.0 mm
• Safe for optical fibers
• Safe for optical fibers
Knife designed for longitudinal cutting of round cables with a diameter of 4 to 6 mm. Particularly suitable for hard sheathed cables such as DAC cables. Will also work well for peeling ADSS cables, universal cables, etc.
• To remove outer jacket and sheath from cables
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
• Cable diameter: 4 - 6 mm
• Replaceable two blades
• High build quality (aluminium)
• Adjustment to cable diameter
• Adjustment to sheath thickness
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
![Indoor Flat Cable WHITE (2xG.657A1, limited bending radius) [1000 m]](https://www.dipol.com.pl/img/thumbnails/l7102b+.jpg/72bad4dd3287308d14f82de884ee459c.jpg)
The L7102B fibre optic cable is a flat duplex cable, i.e. a dual-fibre fibre optic cable for indoor applications.
• Lightweight but resistant to mechanical damage
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
• 2 single-mode fibres
• Fibres in G.657A1 standard with reduced bending radius
• Easy to process without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: white
2-fibre subscriber cable in B2ca sheath – ideal for installation in multi-family housing and other facilities with duplex connections.
• Lightweight, but resistant to mechanical damage
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
• 2 single-mode fibres
• Fibers in G.657A1 standard with reduced bending radius
• Easy processing without the need for dedicated tools
• LSOH sheath
• CPR class: B2ca
• Color: white
![Self-supporting Universal FTTx Cable: SM 2J 9/125 (2x G.657A2, LSOH, black) [1000 m]](https://www.dipol.com.pl/img/thumbnails/l7102_1000+++.jpg/f415cbd25e0e56ab9d93b3ab372aa54c.jpg)
ULTIMODE FC.E-2SM is a universal fiber optic cable in LSOH jacket, so it can be used outdoors and indoors.
• Very convenient to install
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
• 2 single-mode fibres
• Fibres in G.657A2 standard with reduced bending radius
• Easily processed without the need for special tools
• LSOH coating
• CPR class: Eca
• Colour: black
