EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
DS-KAD706Y is an audio, video and power distributor dedicated to work with Hikvision 2nd generation video door entry system in 2-wire system.
• Audio, video and power distributor for Hikvision 2nd generation 2-wire video door entry system
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
• 6 x 2-Wire interface (CH1-CH6 power supply for monitors, including CH6 power supply for door station)
• 2 x 2-Wire interface (cascade communication using DS-KAD706Y-S)
• 1 x RJ-45 10/100 Base-T (LAN connection)
• 24 VDC power supply (no power supply included)
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Subscriber outlet designed for wall mounting. Used in FTTH networks for terminating subscriber lines. Low depth and modern design.
• Compact size
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
• Space for 2 SC simples/LC duplex adapters (no flange)
• DAC input and 7mm microtube (outer diameter)
• Clips for DAC and microtube clamps
• Intuitive fiber organization
• Divided into 2 zones: switching and splicing section
ULTIMODE TB-04H cable junction box enables termination of a subscriber's fibre optic line. It can terminate up to 8 fibers.
• Space for 4 SC simplex/LC duplex adapters
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
The F1-6000 cutter is designed for fast and accurate cutting of fibres with 125 µm jacket diameter and 250/900 µm coverage.
• Easy to use - no adjustment required
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
• Ceramic blade
• Graduated scale (2 to 20 mm)
• Ceramic blades designed for 6000 operations
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Small, easy to use
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx).
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
The GRANDWAY FHP2B04 optical power meter is a device for checking the optical path attenuation of single- and multimode optical fibre networks.
• Memory for up to 999 measurements
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
• 850, 1300, 1310, 1490, 1550, 1625 nm
• InGaAS detector
• Possibility to measure relative or absolute power level
• Powered by rechargeable batteries via power supply
• Auto shut-off function
The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
