EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The GRANDWAY FHS1D02 light source is an essential tool for measuring optical path attenuation in FTTx networks.
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• 4x AAA battery power supply
The GRANDWAY FHS2Q01F light source is an essential tool for measuring optical path attenuation in FTTx networks.
• For multi mode and single mode fiber based networks
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
• Generated wavelength: 850 nm, 1300 nm, 1310 nm or 1550 nm
• Output power: -5.0 dBm
• Simple and intuitive operation
The GRANDWAY FHO3000L-D26 reflectometer is used to measure reflectance, estimate attenuation and analyse events in the transmission optical path.
• Diagnostics of optical paths of up to several tens of km
• Large 5 inch display
• Reflectance measurement and attenuation estimation at 1310 nm and 1550 nm
• Dynamics 26/24 dB
• Small size and easy to use
• Built-in optical power meter and visible light source (VFL)
• FLM function - event mapping for less experienced users
• 40,000 measurements stored
• Possibility to generate detailed reports on PC
• Large 5 inch display
• Reflectance measurement and attenuation estimation at 1310 nm and 1550 nm
• Dynamics 26/24 dB
• Small size and easy to use
• Built-in optical power meter and visible light source (VFL)
• FLM function - event mapping for less experienced users
• 40,000 measurements stored
• Possibility to generate detailed reports on PC
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
The AI-5 PRO is the entry-level model in Signal Fire's extensive range of splicing machines.
• 6 motors responsible for fibre positioning
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
• Positioning to the core or to the fibre cladding
• Auto mode possible
• Image magnification x300
• Min. splicing time 8 seconds
• Fast oven - it takes 18 s to heat and shrink a 40 mm splice protective sleeve
• Configuration via phone app (Android/iOS)
• Settable software lock of the splicer
• Large (5'') display with adjustable brightness
• Possibility to create splice reports with a dedicated application (export to xls)
• Metal casing with rubber coating underneath.
• LED lamp
• High-capacity (5200 mAh, approx. 160 splicing and heating cycles), replaceable battery
• Battery charging time of approx. 3 h
• Universal fibre holders
• Practical carrying case included
• Full set of accessories
Signal Fire AI-9 is a splicer that has a built-in optical power meter and VFL visual fault locator.
• 4-year Authorised Distributor warranty
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
• Built-in power meter and visual fault locator
• 6 motors for fibre positioning
• Positioning to the core or to the fibre jacket
• Touch screen
• Auto mode capability
• Image magnification x300
• 4-core processor for high speed operation
• Minimum welding time of 6 seconds
• Fast oven - welding a 40 mm weld sheath takes 15 seconds
• Configuration via phone app (Android/iOS)
• Large (5.1'') display with adjustable brightness
• Possibility to create welding reports with the dedicated application (export to xls)
• Metal casing with rubber coating underneath
• Approximately 240 welding and welding cycles per charge
• Battery charging time of approx. 3.5 h
• Comprehensive set of accessories
The Sendun SD-9+ fibre optic splicer is designed for splicing optical fibres. It uses position-to-core technology with an auto-focus function.
• 4-year Authorised Distributor Warranty
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
• 6 motors for fibre positioning
• 4-core processor for speed of operation
• Positioning to the core or to the fibre jacket
• Can operate in Auto mode or one of 41 presets
• Built-in optical power meter and visual fault locator VFL
• Image magnification x380
• Motor speed
• Min. splicing time 5 seconds
• Min. time to weld 40 mm weld shield is 11 seconds
• 4.3'' touchscreen display
• 7200 mAh battery allowing an average of 320 welding + sealing cycles
• Electrode life of approx. 5,000 splices
• Universal fibre holders
• Practical, capacious case
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
The Signal Fire MC-16 is a multifunctional tool designed to work with optical fibres.
• Multifunctional tool to work with optical fibres
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
• Cleaving optical fibres before splicing
• Stripping of optical fibres from 900 μm and 250 μm sheaths
• Fibre cleaning
• Peeling of 2-3 mm patchcords
• Cutting of cables and their components with kevlar blades
The Miller MSAT-5 stripper is a tool designed to make indentations in cable tubes and sheaths without disturbing the optical fibres.
• Applicable for tubes with five diameters, from 1.9 mm to 3.0 mm
• Safe for optical fibers
• Safe for optical fibers
