Surface-mounted housing AWO000 7/TRP20/DSPR

1. Use appropriate tools (e.g., transport carts) and a team of people to move large and heavy items to avoid damage and injury.
2. Avoid tilting the device during transport - stabilize it to prevent tipping.
3. Place the device on a level surface and secure it using fasteners (e.g. to the floor, wall or frame).
4. Make sure that the system site is properly prepared:
- for standing products: the floor must be stable and sturdy, capable of bearing the weight of a fully loaded cabinet
- for hanging products: the wall must be strong enough (e.g. concrete, brick, solid gypsum board with reinforcement).
5. Use personal protective equipment such as gloves during installation. The cabinet may have steel parts with sharp edges.
6. Do not exceed the maximum load capacity of the product.
7. When installing devices, use dedicated rails, shelves or mounts according to the instructions of the cabinet and devices.
8. Install the cabinet grounding system in accordance with electrical safety standards.
9. Restrict access to the cabinet to trained persons only.
10. If damage (e.g. deformation, loose components) is detected, contact technical service.