Fiber optic patch cord with a length of 1 meter and a diameter of 3 millimeters, manufactured from single-mode duplex fiber optic cable terminated with an SC/APC connector on one side and an FC/UPC connector on the other.
• Connectors: 2x SC/APC - 2 x FC/UPC
• 2 single-mode fibers (G.657A1).
• Length: 1 m
• Low attenuation
• 2 single-mode fibers (G.657A1).
• Length: 1 m
• Low attenuation
Optical Splitter P-SC-PLC.1-02 allows splitting the optical power transmitted in a fiber optic path into 2 equivalent paths.
• Power splitting 1x2
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
• Operation in the whole band range 1260-1650 nm
• G.657A fiber optics of 1 m length ended with SC/APC connectors
• Small dimensions
• Stable operation
The GFP-4A wall-mounted distribution frame has one input for the trunk cable and 4 outputs for subscriber cables. It is designed for wall mounting.
• The distribution frame is designed for wall mounting
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
• Space for 4 SC simplex / LC duplex adapters
• Space for 4 splices
• 1 input port
• 4 output ports
The GFM-12(F) metal distribution box has been designed for use in various conditions. The electrostatically powder-coated installation box is resistant to corrosion as well as to low and high temperatures in an outdoor environment.
The GFM-48(F) metal distribution housing has been designed for use in various conditions. The electrostatically powder-coated installation housing is resistant to corrosion as well as to low and high temperatures in an outdoor environment.
The GFM-96(F) metal distribution housing has been designed for use in various conditions. The electrostatically powder-coated installation housing is resistant to corrosion as well as to low and high temperatures in an outdoor environment.
The GFM-144(F) metal distribution housing has been designed for use in various conditions. The electrostatically powder-coated installation housing is resistant to corrosion as well as to low and high temperatures in an outdoor environment.
The GFP-12F-T-2 fiber optic coupler allows you to make a fiber optic connection including up to 12 splices. Flat design allows it to be used in locations with limited space.
• IP68 protection class
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
• Suitable for telecom ducting, underground systems
• Compact size
• Space for 12 fiber optic splices
Horizontal straight-through joint repair joint. It is designed for 2 cables with an outer diameter not exceeding 6.5 mm.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 4 splices
GFP-6P fiber optic coupler can be used in ground systems as a repair element or coupler for DAC cables with a maximum of 12 fibers.
• Material: PC+ABS
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/ 12 splices
• UV-resistant housing
• Protection rating: IP65
• Can protect up to 6/ 12 splices
