English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Low noise LNB LWB202L Wideband LO 10.41 GHz for SAT systems
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The R70501 SA-51 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed on the input of the SMATV system, the device amplifies and equalizes the signals before further distribution.
• Amplifier with power supply designed for 5-input multiswitches
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
The R70511 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed at the input of an SMATV system, the device amplifies and equalizes the signals before further distribution (four SAT IF signals - polarizat...
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The splitter is used in multiswitch installations to extend the signal bus, consisting of four satellite lines that carry signals from a Quatro LNB and terrestrial line with DVB-T, DAB, FM signals, into four branches/subnetworks. The device is equipped with two DC-transition switches that in "ON" po...
• Sub-network partition (4 branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
The splitter is used in multiswitch installations to extend 9-cable systems into two subnetworks (18 outputs). The splitter is equipped with DC-pass switch that in "ON" position runs current through "H" lines to both branches. In "OFF" position it takes place only within one branch.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary with lower attenuation and the secondary with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of signal levels in ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
