English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
TERRA's LWO102 4F31 E optical LNB is used to create SAT systems using fiber optic technology.
• FP laser
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
The OTF302 6F55 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1550 nm wavelength (transmission window III).
• FP type laser
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORF302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
Low noise LNB LWB202L Wideband LO 10.41 GHz for SAT systems
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
