The SA-51 amplifier (with power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier with power supply
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Power supply for other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The SA-51 amplifier (without power supply) is designed for use in multiswitch installations. It is equipped with four satellite inputs and one DVB-T/T2/Radio input.
• Multiswitch bus amplifier without power supply
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
• High signal level at outputs
• Refrigerated housing - class A
• Powering of other devices in the installation (amplifiers, multiswitches)
• Powering of DVB-T/T2 antenna preamplifiers
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
SD-510 taps with 10 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 10 dB tapping attenuation
SD-515 tap with 15 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 15 dB tapping attenuation
SD-520 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation
The SDQ-508 splitter is used in multiswitch installations to divide the signal from the multiswitch bus into 4 subnetworks.
• Dividing the multiswitch bus into 4 tracks
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
• High screening efficiency
• Switchable DC-transition
• 4 dB attenuation
The SD-904 splitter is used in multiswitch installations to split the signal from the multiswitch bus into 2 subnetworks.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
SD-910 tap with 10 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 10 dB
• Armoured casing guaranteeing high level of screening - class A
SD-915 taps with 15 dB attenuation are used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• 8 taps for SAT + terrestrial TV
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
• Replaces 9 single TV/SAT taps
• Possibility of switching off the DC line
• Attenuation of tap path 15 dB
• Armoured casing guaranteeing high level of screening - class A
