EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The two-way GSM splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the frequencies 800-2500 MHz.
• Number of outputs: 2
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
The GSM three-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 3
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
The four-way GSM splitter is used to distribute the amplified signal to the indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 4
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
Protector used to protect GSM amplifiers against surges.
• Maximum power 200 W
• VSWR <1.1
• 0.2 dB attenuation
• VSWR <1.1
• 0.2 dB attenuation
The eight-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 670 - 3800 MHz band.
• Number of outputs: 8
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 5 dB.
• Transit attenuation <2.2 dB
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 8 dB.
• Transit attenuation <1.3 dB
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
• Breakthrough attenuation <1 dB
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an N connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an SMA R/P connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
