EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The two-way GSM splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the frequencies 800-2500 MHz.
• Number of outputs: 2
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
The GSM three-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 3
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
The four-way GSM splitter is used to distribute the amplified signal to the indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 4
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
Protector used to protect GSM amplifiers against surges.
• Maximum power 200 W
• VSWR <1.1
• 0.2 dB attenuation
• VSWR <1.1
• 0.2 dB attenuation
The eight-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 670 - 3800 MHz band.
• Number of outputs: 8
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 5 dB.
• Transit attenuation <2.2 dB
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 8 dB.
• Transit attenuation <1.3 dB
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 8 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
• Breakthrough attenuation <1 dB
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an N connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an SMA R/P connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• SMA R/P connector
The TRANS-DATA DZ7 DW4-A is an internal omnidirectional antenna designed to improve the 5G/LTE signal reception.
• Indoor, omnidirectional antenna
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
• Broadband 617-960, 1650-2700, 3300-4200, 4800-6000 MHz
• Gain 4-6 dBi
• Low VSWR <1.9
• Ideal for LTE/ 5G repeaters
Omnidirectional antenna for receiving and transmitting signals in the 890-1990 MHz band. It has a gain of 5 dBi and is equipped with a 2.8 m cable terminated with an FME connector.
• Bandwidth 890-1990 MHz
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
Omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 7 dBi.
• Band 806-2500 MHz
• Gain 7 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• N-connector
• Gain 7 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• N-connector
Omnidirectional antenna for receiving and transmitting signals in the 824-1990 MHz band. It has a gain of 3 dBi.
• Band 824-1990 MHz
• 3 dBi gain
• VSWR <2.5
• Impedance 50 Ω
• Omnidirectional antenna
• SMA connector
• 3 dBi gain
• VSWR <2.5
• Impedance 50 Ω
• Omnidirectional antenna
• SMA connector
Omnidirectional antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 8 dBi.
• Frequency range 698-2700 MHz
• Gain: 8 dBi
• VSWR <2
• Impedance 50 Ω
• Omi directional antenna
• N connector
• Gain: 8 dBi
• VSWR <2
• Impedance 50 Ω
• Omi directional antenna
• N connector
Omnidirectional antenna for receiving and transmitting signals in the 617-4200 MHz band. Gain 5 dBi.
• Frequency range 617-4200 MHz
• Gain up to 5 dBi
• VSWR <2.5
• Impedance 50 ohm
• Omi directional antenna
• SMA connectors
• Gain up to 5 dBi
• VSWR <2.5
• Impedance 50 ohm
• Omi directional antenna
• SMA connectors
Omnidirectional antenna for receiving and transmitting signals in the 450 MHz band. It has a gain of up to 3.6 dBi.
• Bandwidth 430-490 MHz
• Gain up to 3.6 dBi
• VSWR <2,5
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
• Gain up to 3.6 dBi
• VSWR <2,5
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
Omnidirectional antenna for receiving and transmitting signals in the 617-7200 MHz band. It has a gain of up to 7 dBi.
• Bandwidth 617-7200 MHz
• Gain of up to 7 dBi
• VSWR <3
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
• Gain of up to 7 dBi
• VSWR <3
• Impedance 50 Ω
• Omnidirectional antenna
• N-connectors
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 10 dBi.
• Band 806-2500 MHz
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 10 dBi.
• Bandwidth 698-2700 MHz
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
An antenna for receiving and transmitting signals in the 806-2700 MHz band. It has a gain of 8 dBi and is equipped with a 12 cm cable terminated with an N connector.
• Band 806-2700 MHz
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
An antenna for receiving and transmitting signals in the 806-2700 MHz band. It has a gain of 8 dBi and is equipped with a 5 m cable terminated with an SMA connector.
• Bandwidth 698-2700 MHz
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional MIMO antenna
• Cable 5 m
• SMA connectors
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional MIMO antenna
• Cable 5 m
• SMA connectors
![Antenna TRANS-DATA LTE KYZ 10/10 + 10 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.pt/img/thumbnails/a741024_10+.jpg/6c706613e1940a1e2f82df7d75f1c6b9.jpg)
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has 10 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
• Gain 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
![Antenna TRANS-DATA LTE KYZ 10/10 + 20 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.pt/img/thumbnails/a741024+.jpg/12f877def26a46ff8c0f1301832fe613.jpg)
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has 10 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
![Antenna TRANS-DATA LTE KYZ 10/10 + 5 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.pt/img/thumbnails/a741024_5+.jpg/779211fdd42643819c4d80763db0398c.jpg)
An antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 10 dBi and is equipped with a 5 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
An antenna for receiving and transmitting signals in the 698-3800 MHz band. It has a gain of 7 dBi and is equipped with a 30 cm cable terminated with an N connector.
• Band 698-3800 MHz
• Gain of 7 dBi
• VSWR <1.8
• Impedance 50 ohm
• MIMO directional antenna
• Cable 30 cm
• N connectors
• Gain of 7 dBi
• VSWR <1.8
• Impedance 50 ohm
• MIMO directional antenna
• Cable 30 cm
• N connectors
Antenna for receiving and transmitting signals in the 617-3800 MHz band. It has 9 dBi gain and is equipped with a 30 cm cable terminated with an N type connector
• Band: 617-3800 MHz
• Gain max. 9 dBi
• VSWR <2.0
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 30 cm
• N connector
• Gain max. 9 dBi
• VSWR <2.0
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 30 cm
• N connector
![Antenna TRANS-DATA 5G KYZ 10/10 + 10 m cable + SMA [698-960, 1710-2700, 3300-3800 MHz]](https://www.dipol.pt/img/thumbnails/a741027_10+.jpg/23e1022d0a70db2f40008a8f70510d30.jpg)
Antenna for receiving and transmitting signals in the 698-3800 MHz band. It has 11 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-3800 MHz
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz), 11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz), 11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
Antenna for receiving and transmitting signals in the 698-3800 MHz band. It has 11 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-3800 MHz
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz),11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 9,5 dBi (698-960 MHz), 10,5 dBi (1710-2700 MHz),11 dBi (3300-3800 MHz)
• VSWR <1.9
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 5 m
• SMA connectors
An antenna for receiving and transmitting signals in the 380-2700 MHz band. It has up to 7 dBi gain and is equipped with a 12 cm cable terminated with an N connector.
• External, panel, directional
• Zero-band: 380-698/698-960/1710-2700 MHz
• Working on networks: GSM, DCS, UMTS, WLAN, LTE
• Gain:
3 dBi ( 380-698 MHz)
4 dBi (698-960 MHz)
7dBi (1710-2700 MHz)
• Low VSWR <2.5
• 12 cm cable terminated with N socket
• Housing made of ABS plastic resistant to UV radiation and weather conditions
• Mast fitting with U-shaped fasteners
• Adjustable inclination of the antenna in relation to the mast 0-90^o^^
• Can be mounted to vertical and horizontal pipe
• Zero-band: 380-698/698-960/1710-2700 MHz
• Working on networks: GSM, DCS, UMTS, WLAN, LTE
• Gain:
3 dBi ( 380-698 MHz)
4 dBi (698-960 MHz)
7dBi (1710-2700 MHz)
• Low VSWR <2.5
• 12 cm cable terminated with N socket
• Housing made of ABS plastic resistant to UV radiation and weather conditions
• Mast fitting with U-shaped fasteners
• Adjustable inclination of the antenna in relation to the mast 0-90^o^^
• Can be mounted to vertical and horizontal pipe
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 9.5 dBi.
• Band 806-2500 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 9.5 dBi.
• Bandwidth 698-2700 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 10 m
• SMA connectors
Antenna for receiving and transmitting signals in the 698-2700 MHz band. Gain 9.5 dBi.
• Frequency range 698-2700 MHz
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
• Gain: 9.5 dBi
• VSWR <1.5
• Impedance 50 Ohm
• Directional antenna
• Cable length: 5 m
• SMA connectors
![Patchcord F/UTP [cat. 6] 1 m blue NETSET](https://www.dipolnet.com/img/thumbnails/j21311n+.jpg/b3d79dc9b4d55257208f174a942b2e2f.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 1 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
![F/UTP patchcord [cat. 6] 2 m blue NETSET](https://www.dipolnet.com/img/thumbnails/j21321n+.jpg/551ffe82942cd3491a10e4b0546dae7a.jpg)
NETSET's F/UTP Category 6 patchcords are high quality interconnecting network cables designed for reliable data transmission in computer networks.
• Category: 6
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
• Length: 2 m
• Colour: blue
• Shielded
• Standard: ANSI/TIA-568-C.2, ISO/IEC 11801, IEC 60603-7, EN50173
• Brand: NETSET
• System warranty: 25 years
