EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The OCTO TOO 001 Triax LNB is a device that enables the reception of satellite signals. It has eight fullband outputs.
• LNB type: OCTO
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
SINGLE TRIAX TSI 100 Gold LNB satellite converter dedicated to installation for one satellite receiver. The converter is equipped with one fullband output.
• Converter type: SINGLE
• Number of outputs: 1
• 62 dB amplification
• Handle diameter 40 mm
• Number of outputs: 1
• 62 dB amplification
• Handle diameter 40 mm
The TWIN TRIAX 200 Gold LNB satellite converter is equipped with two independent fullband outputs.
• Converter type: TWIN
• Number of outputs: 2
• 62 dB amplification
• bracket diameter 40 mm
• Number of outputs: 2
• 62 dB amplification
• bracket diameter 40 mm
QUAD TRIAX 404 Gold LNB satellite converter equipped with four independent fullband outputs.
• Converter type: QUAD
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
• Number of outputs: 4
• 62 dB amplification
• Handle diameter 40 mm
QUATRO TRIAX 400 Gold LNB satellite converter dedicated for multiswitch installations. One output for each polarization-band pair. Colour coding of the outputs makes them easy to identify.
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
The optical SAT/RTV OTX 1310 KIT from TRIAX allows the introduction of DVB-S/S2 satellite signals and DVB-T2 digital terrestrial TV, DAB radio and FM radio into a fibre optic installation.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
The QUATRO converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial TV antennas. It is powered from a multiswitch.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
The QUAD converter has been designed for output replication of satellite IF signals and DVB-T/T2 and FM/DAB digital terrestrial antennas.
• Receiver works with TOU 232 KIT and LNB TOL32
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
• Converts optical signal to electrical signal (4x SAT + DVB-T)
• Sensitivity: -15...0 dBm
Optical splitter The TOS 02D 2-output optical splitter is a device with which a fibre optic signal can be divided into 2 optical paths.
• Splits optical line into two paths
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
• Easy installation in standard cabinets / installation boxes
• FC/PC sockets
• When needed - can be replaced by a 3-out or 4-out splitter
The TOS 03D optical splitter allows splitting the optical signal into 3 paths. The BOX type housing allows installation in any cabinet.
• Signal splitting into 3 tracks
• FC/PC sockets
• BOX type housing
• Attenuation 5.5 dB
• FC/PC sockets
• BOX type housing
• Attenuation 5.5 dB
