TURBO HD 4.0 Camera: Hikvision DS-2CE11D8T-PIRL (compact, 1080p, 2.8 mm, 0.005 lx, IR do 20m, PIR)

View of the camera

The included accessories

View of the connectors

The Hikvision DS-2CE11D8T-PIRL M75402 camera has been designed for use in video surveillance systems based on HD-TVI DVRs. The enhanced video system (HD-TVI) fully utilizes the 2 MP image resolution of the camera. Thanks to high sensitivity of the image sensor (0.005 lx) and built-in IR illuminator (EXIR 2.0) with range up to 20 m, the camera provides high quality video coverage even in difficult lighting conditions. The camera is equipped with PIR motion detector that supports the function of video motion detection. After proper configuration of the Hikvision camera and DVR supporting this kind of cameras, alarms will be triggered only when the motion detection and PIR sensor events occur at the same time. The optical indicator on the camera is signalling the alarms.

The purpose of the PIR sensor is a better detection and recognition of motion detection. Video motion detection relies on image analysis and can result in multiple false alarms. A typical example is the detection of branches swaying in the wind or falling rain. A lot of alarms are also generated by the lack of proper lighting. Each unimportant alarm translates into loss of disk space and the need to browse unnecessary recordings. The PIR detector significantly limits occurrence of such alarms, because it works based on the detection of temperature changes.

The PIR function of the camera can be combined with video motion detection after connecting it to a Turbo HD 4.0 DVR. It is necessary to switch on the false alarm filter in the DVR. An alarm and video recording will be triggered only if an event is detected simultaneously by the video motion detection of DVR and by the PIR sensor. An additional advantage of the camera is the ability to turn on the built-in lamp lighting the scene with white light. It has dual functionality. First of all, the intruder can be better illuminated, which translates into a higher quality of the recorded video. Secondly, the light has also a deterrent effect.

High Definition Transport Video Interface (HD-TVI) is a new technology that allows users to send uncompressed, high-resolution video over coaxial or twisted-pair cables (using dedicated baluns). The transmitted video signal is in analog form, with bandwidth much greater than in the case of CVBS (SD). As the signal is not compressed, the picture is more natural during live viewing. There is no delay and the configuration of such a system is easier compared to IP CCTV solutions.

The camera belongs to the Low Light series, with sensitivity of 0.005 lx. This feature guarantees good image quality even in low-light conditions.

The camera provides the ability to control its OSD menu using the video signal cable. The control is possible via a compatible DVR, after selecting PTZ control in its menu and switching on the menu of the camera, with access to all configuration options.

Name	DS-2CE11D8T-PIRL
Code	M75402
Standard	HD-TVI
Effective pixels	1920 x 1080
Sensitivity (F2.0, AGC ON)	0.005 lx
Electronic shutter	Yes
AGC	Yes
OSD menu	Yes, control via DVR
BLC	Yes
WDR	Yes
Day/Night	Yes, ICR
Digital noise reduction	Yes, 3D-DNR
Privacy masks	Yes, 4
Mirror image	Yes
Motion detection	Yes, 4 zones
IR illuminator	range up to 20 m
Lens	2.8 mm
Viewing angle	103.5°
Housing type	compact (bullet)
Dimensions	68 × 70 × 180 mm
Housing material	metal
Operating temperature range	-40°C...+ 60°C
IP rating	IP67
Connectors	video (BNC) power (2.1/5.5)
Power	12 VDC; 0.375 A
Power consumption	4.5 W
Weight	0.35 kg
Remarks	-