TV/SAT tap SD-520 Terra class A

Code: R70518
€45.88
Price Disc. Quantity Validity
€45.88 0 % from 1 piece
Available
SD-520 tap with 20 dB attenuation is used in multiswitch installations. It is used to separate signals from the multiswitch bus.
• Dividing the multiswitch bus into 2 tracks
• High screening efficiency
• Replaces 5 single TV/SAT taps
• DC feed-through selectable
• 20 dB tapping attenuation

Warranty

4-year warranty.

Support

Details

The tap is used in multiswitch installations. It is used to separate the signal from the multiswitch bus. The trunk line with signal from one Quatro LNB consists of four wires. In addition, the tapping device also separates terrestrial TV signals. The tap has a DC-transition switch which, when set to the "ON" position, passes DC voltage through the "H" paths to both branches. When set in the "OFF" position, it only passes voltage to one branch.
The taps SD-510 R70516, SD-515 R70517 and SD-520 R70518 allow to ensure optimum signal levels at a given point of the installation. For a good selection of components it is recommended to use a free application for designing multiswitch systems - SatNet.
The die-cast housing provides high screening efficiency by preventing the penetration of interfering signals to the unit.
Key features:
  • TV/SAT taps with 5 tracks
  • used in installations with multiswitches using subnetwork division
  • replaces 5 single TV/SAT taps
  • has a switchable DC-transition
  • cast housing ensuring high level of screening - class A
  • also available as splitter SSD-504 R70515 and taps SD-510 R70516, SD-515 R70517

Specifications

Product type Tap
Series SD-5 × x
Model SD-520
Brand TERRA
type TV/SAT
Applications Indoor
Inputs/Outputs input count 5
Inputs/Outputs number of outputs 10
Frequency range FM TV MHz 5-862
Frequency range SAT MHz 950-2400
Pass loss FM TV dB 1.1
Pass loss SAT dB 0.8
Tap loss FM TV dB 20
Tap loss SAT dB 18...22
Input separation SAT/SAT dB 30
Input separation TV/SAT dB 30
DC pass-through V track A max 0.5
DC pass-through H track A max 2 (1 for one line)
RF path A max 0.1
Return loss dB > 10
Screening efficiency class A
connector type F
Operating temperature °C -20...+50
Dimensions mm 126 × 135 × 30
Weight kg 0.44

Videos

How to connect a Quatro LNB to Terra multiswitch

Descriptions of the satellite LNB outputs and the multiswitch inputs depend on their manufacturers. To avoid confusion, our movie illustrates the differences and clarifies the issue.

Designing SMATV systems with TERRA SatNet software

Designing antenna systems with the use of free software from TERRA - SatNet application. The program allows to prepare the project in graphical form, to determine signal levels in all outlets and verify if they are compliant with standards, and to decide whether to use equalization function of the amplifiers. The program enables the user to archive the designs.