€21.69
Price | Disc. | Quantity | Validity |
---|---|---|---|
€21.69 | 0 % | from 1 piece |
Available
The A1615 outdoor UHF antenna has been designed both for reception of DVB-T/T2 broadcasts and analog TV signals. It is characterized by small dimensions and high gain. The antenna array and built-in amplifier give a total gain up to 42 dBi.
Details
Antenna suitable for DVB-T/T2 signal reception
The A1615 outdoor UHF antenna has been designed both for reception of DVB-T/T2 broadcasts and analog TV signals. It is characterized by small dimensions and high gain. The antenna array and built-in amplifier give a total gain up to 42 dBi.
Installation of the antenna is very simple. The array is ready to use after fastening the reflector with two screws. The antenna is packed in foil. The main parts of the antenna are made of aluminum. The galvanized steel structural components ensure long life and stability of operation in all conditions.
The same antenna array without amplifier is available as A1610.
Specifications
Antenna type | TV DVB-T/T2 | ||
Name | DIPOL 16/21-48 | ||
Manufacturer | DIPOL | ||
RF antenna type | Directional | ||
General data | |||
' | pcs. | 16 | |
Dimensions | mm | 890 × 320 × 410 | |
Packaging | type | Cardboard box | |
Specifications | |||
Impedance | Ohm | 300 | |
Balun | No | ||
Operating band | UHF | ||
Frequency range | MHz | 470 – 694 | |
Channels | 21 – 48 | ||
Max gain. | dBi | 12 | |
Radiation pattern front/back | dB | 19 – 26 | |
Standing wave ratio | 1.1 – 3 | ||
Polarization | H/V | ||
Amplifier | |||
Built-in amplifier | Yes | ||
Amplified band | UHF | ||
Amplifier | type | LNA-177 | |
Input impedance | Ohm | 300 | |
input impedance | Ohm | 75 | |
Gain | dB | 16...20 (channels 6 – 12), 24...30 (channels 21 – 54), 30...19 (channels 54 – 69) | |
Max. mast/tube diameter | mm | 50 | |
Power supply | voltage | V | 12 |
current | mA | 55 |