The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx)
• Generated wavelength: 1310 nm / 1550 nm
• Output power: -5.0 dBm
• AUTO-OFF function
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -5.0 dBm
• AUTO-OFF function
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
ULTIMODE VFL-V1-10 visual fault locator is designed to diagnose problems with fibre optic cabling.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
The adapter allows for connecting 1.25 mm connectors (e.g. LC, E2000) to optical power meters, light sources, visual fault locators (e.g. L5935).
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester.
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester.
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Cheap meter designed for fiber-optic installations
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Measurement range: -50...+26 dBm
• Reference measurement function
• 3x AAA batteries
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Measurement range: -50...+26 dBm
• Reference measurement function
• 3x AAA batteries
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• OTDR and fibre optic connection tester
• 3.5 inch screen with multi-touch function
• User-friendly interface similar to that of a smartphone
• Measurement at 1310 nm and 1550 nm wavelengths
• 20 dB dynamics
• Light source and power meter function to perform measurements with the transmission method
• Detailed analysis of the entire optical path of up to 80 km
• Assistance to verify events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility of "Pass/Fail" verification
• Option for creating measurement reports pdf/xls
• OTDR and fibre optic connection tester
• 3.5 inch screen with multi-touch function
• User-friendly interface similar to that of a smartphone
• Measurement at 1310 nm and 1550 nm wavelengths
• 20 dB dynamics
• Light source and power meter function to perform measurements with the transmission method
• Detailed analysis of the entire optical path of up to 80 km
• Assistance to verify events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility of "Pass/Fail" verification
• Option for creating measurement reports pdf/xls
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• OTDR and tester of fiber optic connections
• 5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to a smartphone interface
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Function of light source and power meter for transmission method measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Helps verify events and failures: broken or bent fiber, soiled connectors, bad splices, etc.
• “Pass/Fail” verification
• Creating pdf/xls measurement reports
• Twisted pair cable tester and copper cable identification
• OTDR and tester of fiber optic connections
• 5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to a smartphone interface
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Function of light source and power meter for transmission method measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Helps verify events and failures: broken or bent fiber, soiled connectors, bad splices, etc.
• “Pass/Fail” verification
• Creating pdf/xls measurement reports
• Twisted pair cable tester and copper cable identification
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
