The ULTIMODE SFP-405/3G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission: type WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
Code: L1421
€11.80
Available

Optical modules compliant with SFP standard (Small Form-factor Pluggable) are transceivers converting electrical signals into optical signals transmitted over optical fibers and vice versa. This SFP+ module capable of 10 Gbps transmission speed is dedicated for the use of two multimode fibers (duple...
• Duplex transmission (2 optical fibers)
• Multimode fibers
• Wavelength 850 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 300 m
• Type of optical connectors: LC
• Compatible with ULTIMODE, TP-LINK and other devices
Code: L1425
€13.92
Available

Optical modules compliant with SFP standard (Small Form-factor Pluggable) are transceivers converting electrical signals into optical signals transmitted over optical fibers and vice versa. This SFP+ module capable of 10 Gbps transmission speed is dedicated for the use of two single-mode fibers (dup...
• Data transfer rate up to 10 Gbps
• Duplex system (two fibers)
• Designed for use with single-mode fibers
• Max. transmission distance: 10 km
• Optical connector type: LC
• DDM function
Code: L1428
€19.88
Available

SFP/SFP+ modules (Small Form-factor Pluggable) convert electrical signals to optical transmission standards and vice versa. The module supports data rates up to 10 Gbit/s via one single-mode fiber (BiDi / WDM transmission). The maximum transmission distance is 20 km.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
Code: L1430
€26.24
Available

SFP/SFP+ modules (Small Form-factor Pluggable) convert electrical signals to optical transmission standards and vice versa. The module supports data rates up to 10 Gbit/s via one single-mode fiber (BiDi / WDM transmission). The maximum transmission distance is 20 km.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
Code: L1432
€26.24
Available

Ethernet media converter ULTIMODE M-023M allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable into modulated light signal transmitted via multimode fiber cable...
• 1x Ethernet port 10/100 Mbps (RJ-45)
• Maximum transmission distance: 2 km
• Transmission via two multimode fibers
• LED indicators showing operating status
• Easy installation (plug and play)
• Power supply included
Code: L10021
€17.23
Available

Ethernet media converter ULTIMODE M-023G allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable into modulated light signal transmitted via multimode fiber cable over distances up to 2 km. The device is fully compatible with IEEE 802.3, IEEE 802.3u, IEEE 802.3z.....
• Dedicated for multimode FO systems
• Gigabit Ethernet
• Transmission via two multimode fibers up to 2 km
• LED indicators showing operating status
• Easy installation (plug and play)
• Confirmed reliability
Code: L10025
€24.65
Available

Ethernet media converter ULTIMODE M-203G allows to change electrical signals (Ethernet data signal) coming via typical STP/UTP cable (10/100/1000Base TX) into modulated light signal transmitted via single-mode optical fiber cable (1000Base FX). The media converter has two SC connectors used to trans...
• 1 x Ethernet port 10/100/1000 Mbps (RJ-45)
• Long range - 20 km
• Transmission via two single-mode fibers
• LED indicators showing operating status
• Easy installation (plug and play)
• Power supply included
Code: L11025
€24.92
Available

Ethernet media converter ULTIMODE M-403M allows to change electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via single-mode fiber cable...
• Dedicated for fiber optic systems with single-mode fibers
• Transmission via two fibers over a distance up to 40 km
• Fast Ethernet
• Quick and easy installation
• High reliability
Code: L11041
€21.47
Available

Ethernet media converter ULTIMODE M-207M allows to change electrical signals (Ethernet data) coming via typical STP/UTP cable into modulated light signal transmitted via one single-mode fiber...
• Designed for use in IP CCTV and other broadband systems, needs only a single SM fiber (WDM transmission)
• Long maximum transmission distance: 20 km
• 10/100 Mbps Ethernet port (RJ-45)
• The set contains 2 transceivers and power supplies
Code: L11521
€38.43
Available