EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The SFP-011M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 155 Mbps
• Max. transmission distance up to 550 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
Optical SFP module ULTIMODE-023G cooperates with multimode fibers up to 2 km long, at data transmission speeds up to 1.25 Gb/s.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Multimode fibres
• Wavelength 1300 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 2 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The ULTIMODE SFP-023M module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: duplex (2 optical fibers)
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
• Fiber: multimode
• Wavelength: 1300 nm
• Transmission rate: up to 155 Mbps
• Max. transmission distance: up to 2 km
• Type of optical connectors: LC
• Compatible with devices: ULTIMODE, TP-LINK and others
The SFP-203M ULTIMODE module is used to extend the capabilities of network devices with the possibility of implementing transmission via optical fibre.
• Duplex transmission (2 optical fibers)
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single-mode fibers
• Wavelength 1310 nm
• Transmission speed up to 155 Mb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
The SFP-203/5 ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
Optical SFP module ULTIMODE-203/5G LC cooperates with a single-mode fiber up to 20 km long, at data transmission speeds up to 1.25 Gb/s.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The SFP-205/3G ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1550 nm, Rx: 1310 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with Ultimode, TP-LINK and other devices
The ULTIMODE SFP-403/5G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission type: WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1310 nm, Rx: 1550 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
The ULTIMODE SFP-405/3G module is used to extend the capabilities of network devices with the implementation of transmission via fiber optics.
• Transmission: type WDM (1 fiber optic)
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
• Fiber: single mode
• Tx: 1550 nm, Rx: 1310 nm
• Transmission rate: up to 1.25 Gbps
• Max. transmission distance: up to 40 km
• Type of optical connectors: LC
• Compatible with devices: Ultimode, TP-LINK and others
ULTIMODE's SFP+ SR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Multimode fibres
• Wavelength 850 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 300 m
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
ULTIMODE's SFP+ LR module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• Duplex transmission (2 optical fibres)
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single mode fibres
• Wavelength 1310 nm
• Transmission speed up to 10 Gbps
• Max. transmission distance up to 10 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1270/1330 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE SFP+ module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• BiDi/WDM transmission (1 optical fiber)
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
• Single-mode fiber
• Wavelength 1330/1270 nm
• Transmission speed up to 10 Gb/s
• Max. transmission distance up to 20 km
• Optical connector type: LC
• Compatible with ULTIMODE, TP-LINK and other devices
• DDM function
The ULTIMODE M-023M media converter allows to change the transmission medium from STP/UTP twisted pair to multimode optical fibre.
• Ethernet transmission 10/100 Mbps
• 2 multimode fibers
• Wavelength 1300 nm
• Max. transmission distance 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 multimode fibers
• Wavelength 1300 nm
• Max. transmission distance 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-023G media converter allows to change the transmission medium from STP/UTP twisted pair to multimode optical fibre.
• Ethernet transmission 10/100/1000 Mbps
• 2 multimode fibers
• 1300 nm wavelength
• Max. transmission distance: 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 multimode fibers
• 1300 nm wavelength
• Max. transmission distance: 2 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-203G media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode optical fibre.
• Ethernet transmission 10/100/1000 Mbps
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-403M media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode optical fibre.
• Ethernet transmission 10/100 Mbps
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• 2 single-mode fibers
• Wavelength: 1310 nm
• Max. transmission distance 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
![ULTIMODE M-207M media converter - single-mode fibre up to 20 km [2 pieces]](https://www.dipolnet.ro/img/thumbnails/l11521+.jpg/876c8b9d579f97f174a78294b70715da.jpg)
The ULTIMODE M-207M set of media converters allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
![ULTIMODE M-207G 1 Gbps media converter - single-mode fibre up to 20 km [2 pieces]](https://www.dipolnet.ro/img/thumbnails/l11525+.jpg/13c7c8a9da94c7c57a1fe38bcfba60c8.jpg)
ULTIMODE M-207G media converter set allows to change the transmission medium from twisted pair STP/UTP to single mode fiber and vice versa.
• Ethernet transmission 10/100/1000 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength 1310/1550 nm
• Max transmission distance: 20 km
• LEDs indicating the correct operation of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-407M set of media converters allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 40 km
• LEDs indicating correct functioning of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-407M-2 media converter set allows to change the transmission medium from twisted-pair STP/UTP to single-mode optical fibre and vice versa.
• Ethernet transmission 10/100 Mbps
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• Built-in 2-port switch on one of the devices
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• WDM transmission: 1 single mode fiber
• Wavelength: 1310/1550 nm
• Max. transmission distance: 20 km
• Built-in 2-port switch on one of the devices
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power supply included
The ULTIMODE M-1G/SFP media converter allows to change the transmission medium from STP/UTP twisted pair to single-mode or multimode optical fibre.
• 1 x 10/100/1000 Mb/s Ethernet port (RJ-45)
• SFP slot (IEEE 802.3z 1000Base-FX)
• LEDs indicating operation status
• Easy installation (plug and play)
• External AC/DC adapter included
• SFP slot (IEEE 802.3z 1000Base-FX)
• LEDs indicating operation status
• Easy installation (plug and play)
• External AC/DC adapter included
ULTIMODE M-1G/SFP/POE media converter allows you to change the transmission medium from twisted-pair STP/UTP to single-mode or multimode optical fiber. PoE function.
• Ethernet transmission 10/100/1000 Mbps
• SFP slot (IEEE 802.3z 1000Base-FX)
• PoE 802.3af/at
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power adapter included
• SFP slot (IEEE 802.3z 1000Base-FX)
• PoE 802.3af/at
• LEDs to indicate correct operation of the device
• Very easy installation (plug and play)
• Power adapter included
ULTIMODE G-10G/SFP+ media converter allows you to change the transmission medium from twisted-pair STP/UTP to single-mode or multimode optical fiber.
• Ethernet transmission 100/1000/2500/10000 Mbps in the electrical port
• SFP+ slot
• LEDs indicating correct operation of the device
• Very easy installation (plug and play)
• Power supply included
• SFP+ slot
• LEDs indicating correct operation of the device
• Very easy installation (plug and play)
• Power supply included
5 V/1 A power supply for ULTIMODE media converters.
• DC 5 V output voltage
• Maximum output current 1 A
• Plug 2.1./5.5
• Polarisation "+" inside
• Maximum output current 1 A
• Plug 2.1./5.5
• Polarisation "+" inside
The ULTIMODE PC-1172-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: blue
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: blue
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: green
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: green
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Colour: red
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Colour: red
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 0.5 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 0.5 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 1 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 2 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 3 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• Single-mode fibre G.657.A2
• LSZH sheath
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with an SC/UPC connector on both ends.
• SC/UPC - SC/UPC connectors
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1272-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• SC/UPC - SC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1372-05 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• SC/UPC - LC/UPC connectors
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Link reflection loss > 50 dB (Grade 2)
• Length - 5 m
• Single-mode fibre G.657.A2
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Link reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and FC/UPC connectors.
• SC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and FC/UPC connectors.
• SC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-2272-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
ULTIMODE PC-2272W-10 patch cord is a 10-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length: 10 m
• Single-mode fibre G.657.A2
• LSZH coating
• Colour: white
• Diameter: 3 mm
• Connector attenuation: < 0.25 dB (Grade B)
• Connector reflection loss: > 60 dB (Grade 1)
• Length: 10 m
• Single-mode fibre G.657.A2
• LSZH coating
• Colour: white
• Diameter: 3 mm
• Connector attenuation: < 0.25 dB (Grade B)
• Connector reflection loss: > 60 dB (Grade 1)
The ULTIMODE PC-2272-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with SC/APC connectors.
• Złącza SC/APC - SC/APC
• Długość - 0,5 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1)
• Długość - 0,5 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1)
The ULTIMODE PC-2272-1 patch cord is a 1-meter single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-10 patchcord is a 10-meter single-mode fiber optic cable terminated with SC/APC connectors.
• Connectors SC/APC - SC/APC
• Length - 10 m
• Single-mode fiber G.657.A2
• LSZH jacket
• Diameter 3 mm
• Connector loss < 0.25 dB (Grade B)
• Connector return loss > 60 dB (Grade 1)
• Length - 10 m
• Single-mode fiber G.657.A2
• LSZH jacket
• Diameter 3 mm
• Connector loss < 0.25 dB (Grade B)
• Connector return loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-3 patch cord is a 3-meter long ingle-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• SC/APC - SC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC and FC/UPC connectors.
• SC/APC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2), > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2), > 60 dB (Grade 1)
The ULTIMODE PC-2672-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and FC/APC connectors.
• SC/APC - FC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-3572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC and FC/UPC connectors.
• LC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with LC/UPC and FC/UPC connectors.
• LC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-515S1 patch cable is a section of a single-mode fiber optic cable with a length of 5 metres, terminated with LC/PC and SC/PC connectors.
• Connectors: 1x SC/PC - 1x LC/PC
• One single-mode fibre (G.657A1)
• Length: 5 m
• Diameter: 2 mm
• Low attenuation
• One single-mode fibre (G.657A1)
• Length: 5 m
• Diameter: 2 mm
• Low attenuation
The ULTIMODE PC-5572-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-5572-3 patch cord is a 5-meter long single-mode fiber optic cable terminated with FC/UPC connectors.
• FC/UPC - FC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1172D-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1172D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC connectors.
• 2xSC/UPC - 2xSC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1272D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• Złącza 2xSC/UPC - 2xSC/APC
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1), > 45 dB (Grade 2)
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1272D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and SC/APC connectors.
• 2xSC/UPC - 2xSC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-1372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-1372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/UPC and LC/UPC connectors.
• Connectors 2x SC/UPC - 2x LC/UPC
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 50 dB (Grade 2)
The ULTIMODE PC-2272D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2272D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC connectors.
• 2xSC/APC - 2xSC/APC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-2372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 2 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 3 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with SC/APC and LC/UPC connectors.
• Connectors 2xSC/APC - 2xLC/UPC
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1), > 45 dB (Grade 2)
The ULTIMODE PC-2472D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with SC/APC and LC/APC connectors.
• 2xSC/APC - 2xLC/APC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 60 dB (Grade 1)
The ULTIMODE PC-3372D-1B patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Blue color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1G patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Green color
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1R patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• Red colour
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x2 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-05 patch cord is a 0.5 meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 0.5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 0.5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-1 patch cord is a 1-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-3372D-2 patch cord is a 2-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• Złącza 2xLC/UPC - 2xLC/UPC
• Długość - 2 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
• Długość - 2 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
The ULTIMODE PC-3372D-3 patch cord is a 3-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• Złącza 2xLC/UPC - 2xLC/UPC
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
• Długość - 3 m
• Włókno jednomodowe G.657.A2
• Powłoka LSZH
• Średnica 2x3 mm
• Tłumienie złącza < 0,25 dB (Grade B)
• Tłumienie odbić złącza > 45 dB (Grade 2)
The ULTIMODE PC-3372D-5 patch cord is a 5-meter long single-mode fiber optic cable terminated with LC/UPC connectors.
• 2xLC/UPC - 2xLC/UPC connectors
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
• Length - 5 m
• G.657.A2 single-mode fiber
• LSZH coating
• Diameter 2x3 mm
• Connector attenuation < 0.25 dB (Grade B)
• Connector reflection loss > 45 dB (Grade 2)
The ULTIMODE PC-1103D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC connectors.
• Connectors 2x SC - 2x SC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1103D-3 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC connectors.
• Connectors 2x SC - 2x SC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1104D-1 patchcord is a 1-meter multimode fiber optic cable terminated with SC connectors.
• Connectors: 2x SC - 2x SC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Diameter: 2x 3 mm
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Diameter: 2x 3 mm
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
The ULTIMODE PC-1103D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC and LC connectors.
• Connectors 2x SC - 2x LC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1103D-3 patch cord is a 3-meter long multi-mode fiber optic cable terminated with SC and LC connectors.
• Connectors 2x SC - 2x LC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-1703D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with SC and ST connectors.
• Connectors 2x SC - 2x ST
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3303D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3303D-3 patch cord is a 3-meter long multi-mode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 3 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
The ULTIMODE PC-3304D-1 patchcord is a 1-meter multimode fiber optic cable terminated with LC connectors.
• Connectors 2x LC - 2x LC
• Length: 1 m
• OM4 multimode fiber
• LSZH coating
• Diameter: 2x 3 mm
• Connector loss < 0.3 dB
• Connector return loss > 20 dB
• Length: 1 m
• OM4 multimode fiber
• LSZH coating
• Diameter: 2x 3 mm
• Connector loss < 0.3 dB
• Connector return loss > 20 dB
The ULTIMODE PC-3304D-3 patchcord is a section of multimode fibre optic cable with a length of 3 metres terminated with LC connectors.
The ULTIMODE PC-3703D-1 patch cord is a 1-meter long multi-mode fiber optic cable terminated with LC and ST connectors.
• Connectors 2x LC - 2x ST
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Diameter 2x 3 mm
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
Pigtail ULTIMODE PG-152-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/UPC connector. The element is used to terminate fiber optic cable routes.
• SC/UPC connector
• Length - 1 m
• Single mode fiber G.652.D
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• Single mode fiber G.652.D
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171A-1 SC/UPC G.657A1 1 m red, green, blue, yellow.
• 4 pcs of pigtails
• Colors: red, green, blue, yellow
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: red, green, blue, yellow
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171B-1 SC/UPC G.657A1 1 m white, gray, brown, purple.
• 4 pcs of pigtails
• Colors: white, gray, brown, purple
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: white, gray, brown, purple
• SC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-171C-1 SC/UPC G.657A1 1 m aqua, black, orange, pink.
• 4 pcs of pigtails
• Colors: aqua, black, orange, pink
• SC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: aqua, black, orange, pink
• SC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-172-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/UPC connector. The element is used to terminate fiber optic cable routes.
• SC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-252-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/APC connector. The element is used to terminate fiber optic cable routes.
• SC/APC connector
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Set of single-mode pigtails 4 pcs. PG-271A-1 SC/APC G.657A1 1 m red, green, blue, yellow.
• 4 pieces of pigtails
• Colors: red, green, blue, yellow
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Colors: red, green, blue, yellow
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Set of single-mode pigtails 4 pcs. PG-271B-1 SC/APC G.657A1 1 m white, gray, brown, purple.
• 4 pieces of pigtails
• Colors: white, gray, brown, purple
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Colors: white, gray, brown, purple
• SC/APC connector
• Length - 1m
• Single mode fiber G.657.A1
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Single-mode pigtail set 4 pcs. PG-271C-1 SC/APC G.657A1 1 m aqua, black, orange, pink.
• 4 pieces of pigtails
• Colours: aqua, black, orange, pink
• SC/APC connector
• Length - 1 m
• Single-mode fibre G.657.A1
• LSZH sheath
• Attenuation < 0.25 dB (Grade B)
• Rebound attenuation > 60 dB (Grade 1)
• Colours: aqua, black, orange, pink
• SC/APC connector
• Length - 1 m
• Single-mode fibre G.657.A1
• LSZH sheath
• Attenuation < 0.25 dB (Grade B)
• Rebound attenuation > 60 dB (Grade 1)
Pigtail ULTIMODE PG-272-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an SC/APC connector. The element is used to terminate fiber optic cable routes.
• SC/APC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 60 dB (Grade 1)
Pigtail ULTIMODE PG-352-1 is a 1-meter long single-mode fiber optic cable terminated with an LC connector on one end. The element is used to terminate fiber optic cable routes.
• LC/UPC connector
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.652.D single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371A-1 LC/UPC G.657A1 1 m red, green, blue, yellow.
• 4 pcs of pigtails
• Colors: red, green, blue, yellow
• LC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: red, green, blue, yellow
• LC/UPC connector
• Length - 1m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371B-1 LC/UPC G.657A1 1m white, gray, brown, purple.
• 4 pcs of pigtails
• Colors: white, gray, brown, purple
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: white, gray, brown, purple
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Set of single-mode pigtails 4 pcs. PG-371C-1 LC/UPC G.657A1 1 m aqua, black, orange, pink.
• 4 pcs of pigtails
• Colors: aqua, black, orange, pink
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Colors: aqua, black, orange, pink
• LC/UPC connector
• Length - 1 m
• G.657.A1 single-mode fiber
• LSZH jacket
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-372-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an LC connector. The element is used to terminate fiber optic cable routes.
• LC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-572-1 is a 1-meter long single-mode fiber optic cable terminated on one end with an FC/UPC connector. The element is used to terminate fiber optic cable routes.
• FC/UPC connector
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
• Length - 1 m
• G.657.A2 single-mode fiber
• LSZH coating
• Attenuation < 0.25 dB (Grade B)
• Reflection loss > 50 dB (Grade 2)
Pigtail ULTIMODE PG-103-1 is a 1-meter long multi-mode fiber optic cable terminated with an SC connector on one end. The element is used to terminate fiber optic cable routes.
• SC connector
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector return loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector return loss > 20 dB
Pigtail ULTIMODE PG-104-1 is a 1 meter long multimode fiber optic cable terminated on one side with an SC connector. The element is used to terminate fiber optic cable routes.
• Connector: SC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
Pigtail ULTIMODE PG-303-1 is a 1-meter long multi-mode fiber optic cable terminated with an LC connector on one end. The element is used to terminate fiber optic cable routes.
• LC connector
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
• Length - 1 m
• OM3 multimode fiber
• LSZH coating
• Connector attenuation < 0.3 dB
• Connector reflection loss > 20 dB
Pigtail ULTIMODE PG-304-1 is a 1 meter multimode fiber optic cable terminated on one side with an LC connector. The element is used to terminate fiber optic cable routes.
• Connector: LC
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
• Length: 1 m
• Multimode fiber: OM4
• Sheath: LSZH
• Connector loss: < 0.3 dB
• Connector return loss: > 20 dB
The ULTIMODE A-111 single-mode adapter allows to connect optical fibers terminated with SC/UPC connectors.
• Adapter type: simplex
• Connectors: SC/UPC - SC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/UPC - SC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-115 single-mode adapter allows to connect optical fibers terminated with SC/UPC and FC/UPC connectors.
• Adapter type: simplex
• Connectors: SC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-122 single-mode adapter connects optical fibers terminated with SC/APC connectors.
• Adapter type: simplex
• Connectors: SC/APC - SC/APC
• Insertion loss: < 0.2 dB
• Application: single-mode networks
• Connectors: SC/APC - SC/APC
• Insertion loss: < 0.2 dB
• Application: single-mode networks
ULTIMODE A-155 single-mode adapter allows to connect optical fibers terminated with FC/UPC connectors.
• Adapter type: simplex
• Connectors: FC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: FC/UPC - FC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-155 single-mode adapter allows to connect optical fibers terminated with FC/APC connectors.
• Typ adaptera: simplex
• Złącza: FC/APC - FC/APC
• Tłumienie: < 0,2 dB
• Zastosowanie: sieci jednomodowe
• Złącza: FC/APC - FC/APC
• Tłumienie: < 0,2 dB
• Zastosowanie: sieci jednomodowe
ULTIMODE A-211 single-mode adapter allows you to connect optical fibers terminated with SC/UPC connectors.
• Adapter type: duplex
• Connectors: 2xSC/UPC - 2xSC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2xSC/UPC - 2xSC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-222 single-mode adapter allows connection ot two optical fibers terminated with SC/APC connectors.
• Adapter type: duplex
• Connectors: 2x SC/APC - 2x SC/APC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2x SC/APC - 2x SC/APC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-233 single-mode adapter allows connection of two optical fibers terminated with LC/UPC connectors.
• Adapter type: duplex
• Connectors: 2x LC/UPC - 2x LC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
• Connectors: 2x LC/UPC - 2x LC/UPC
• Attenuation: < 0.2 dB
• Application: single-mode networks
The ULTIMODE A-M111 multimode adapter allows connection of two optical fibers terminated with SC connectors.
• Adapter type: simplex
• Connectors: SC - SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: SC - SC
• Attenuation: < 0.2 dB
• Application: multimode networks
The ULTIMODE A-M211 multimode adapter allows connection of two optical fibers terminated with SC connectors.
• Adapter type: duplex
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
The ULTIMODE A-M233 multimode adapter allows connection of two multimode optical fibers terminated with LC connectors.
• Adapter type: duplex
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
The SC/APC - SC/UPC adapter allows you to solve the problem of connecting patchcords with an SC/UPC connector (blue, straight ferrule) to devices with the SC/APC socket (green, truncated ferrule).
• SC/APC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The SC/UPC – SC/APC adapter allows you to solve the problem of connecting patchcords with SC/APC connector (green, truncated ferrule) to devices with SC/UPC socket (blue, straight ferrule).
• SC/UPC male - SC/APC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The FC/UPC - SC/UPC adapter allows you to connect cables terminated with SC/UPC plugs to devices with FC/UPC sockets (e.g. devices for optical TV/SAT signal transmission, video converters, optical power meters).
• FC/UPC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The FC/APC - SC/APC adapter allows you to connect cables terminated with an SC/APC plug to devices with an FC/APC socket (e.g. devices for optical TV/SAT signal transmission).
• FC/APC male - FC/APC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The LC/UPC - SC/UPC adapter provides a solution to the problem of connecting cables/patchcords with an SC/UPC connector to devices or patchpanels with an LC/UPC socket.
• LC/UPC male - SC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The SC/UPC - LC/UPC adapter provides a solution to the problem of connecting cables/patchcords with an LC/UPC connector to devices or patchpanels with an SC/UPC socket.
• SC/UPC male - LC/UPC female adapter
• Attenuation 0,2 dB
• Attenuation 0,2 dB
The ULTIMODE A-M211 multimode adapter allows to connect optical fibers terminated with SC connectors.
• Adapter type: duplex
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
• Connectors: 2x SC - 2x SC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
The ULTIMODE A-M233 multimode adapter allows you to connect optical fibers terminated with LC connectors.
• Adapter type: duplex
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
• Connectors: 2x LC - 2x LC
• Attenuation: < 0.2 dB
• Application: multimode networks
• Color: purple (OM4)
Optical attenuator (SC female to SC male) with 2 dB insertion loss, coopering with single-mode optical fibers.
• SC female to SC male optical attenuator
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
• Insertion loss: 2 dB
• For single-mode equipment
• Ability to work above 1300 nm
• Metal casing
Optical attenuator (SC female to SC male) with 5 dB insertion loss, coopering with single-mode optical fibers.
• Attenuation: 5 dB
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
• Designed for SC connectors (SC female to SC male)
• For single-mode equipment
• Ability to work over 1300 nm
• Metal casing
Optical attenuator with 5 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 5 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
Optical attenuator with 10 dB attenuation, used to match optical levels to the dynamic range of the optical receiver input.
• 10 dB attenuator
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
• FC/UPC plug - FC/UPC socket
• Single-mode networks
• Wavelength > 1300 nm
• Metal housing
The ULTIMODE MT-524 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
• Size 1U
• Telescopic slides
• Large tray for 24 splices
• Front plates can be purchased for various types of adapters
• Wide cable entry hole
• Large guides for tube/fibre supply
The ULTIMODE MT-548 pull-out panel is designed for use in optical fibre networks as a distribution point and connection point.
• Panel for 19'' rack
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
• 2U size
• Telescopic slides
• Two large cassettes for 48 splices
• Front plates for various types of adapters can be purchased
• Wide opening for cable entry
• Large guides to keep tubes/fibres stocked
The ULTIMODE media converter adapter allows up to 14 converters to be mounted in a rack.
• Mounting of up to 14 media converters in a rack
• Each slot is equipped with a separate power supply path
• Mechanical cooling - two fans
• Redundant power supply
• Plug and Play support
• Each slot is equipped with a separate power supply path
• Mechanical cooling - two fans
• Redundant power supply
• Plug and Play support
ULTIMODE TB-02H cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Optical fiber termination box for indoor applications
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
• For connecting up to 4 LC or 2 SC/FC connectors
• Possibility of securing mechanical splice ULTIMODE MS-1 L5550
• Ease of installation, operation and maintenance
ULTIMODE TB-02H-1 cable junction box allows to terminate a subscriber's optical fibre line. It can terminate max. 4 fibers.
• Small in size
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
• Space for 2 SC simples/LC duplex adapters
• Removable front cover
ULTIMODE TB-04H cable junction box enables termination of a subscriber's fibre optic line. It can terminate up to 8 fibers.
• Space for 4 SC simplex/LC duplex adapters
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
• Capable of securing 4 fibre splices
• Flip-up mounting tray
• Removable front cover
The GP62DW-7 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 12 fibers, depending on the installed adapters.)
• Wall-mounted distribution frame
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
• Space for mounting 4 SC simplex/LC duplex adapters
• Space for 12 splices
• Easy handling of excess fiber
• 1 input port
• 4/8 output ports
• Cover with latches with additional locking screw
• Easy to install, operate and maintain
The GP62DW-1 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 16 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
• Cassette for 16 splices
• Space for mounting 8 SC simplex adapters
• Wall mounting
The GP62DW-3 wall-mounted distribution frame allows for easy organization of fiber optic cables (up to 24 fibers, depending on the installed adapters.)
• 3 input/output ports
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
• Cassette for 24 splices
• Space for mounting 12 SC simplex adapters
• Wall mounting
• Lock with key
The GXF6-15N5S distribution box is used for termination of fiber optic cabling with a total of 36 fibers.
• Wall-mounted distribution box
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
• Space for 36 SC simplex/LC duplex adapters
• Space for 36 splices
• Easy handling of excess fiber
• 3 input ports
• Space for splitters
• Lockable with a padlock (not included)
• Easy to install, operate and maintain
The ULTIMODE TB-04B wall switch allows for the management of up to 4 optical fibres.
• Wall switch, indoor (IP65)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
• Space for 2 SC simplex/LC duplex adapters
• Space for 4 fibre optic splices
• Slot for mini optical splitter
• Key lock
• 2 inlet and outlet ports (chokes)
The ULTIMODE TB-48B distribution box allows for the management of 48 optical fibres.
• For connecting up to 48 SC/FC or 96 LC connectors
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
• Two trays accommodating 48 fusion splices or 32 mechanical splices (ULTIMODE FAST-MS1 L5550)
• Place for two optical splitters
• Key lockable door
• Ease of installation, operation and maintenance
The ULTIMODE P-6 splice tray provides protection for fibre splices and proper fibre alignment. It is mainly designed for ULTIMODE MT panels.
• Space for 24 thermal splices
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
• Large dimensions ensure comfortable fibre routing
• Designed for ULTIMODE MT-548 switchgear
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC simplex / LC duplex adapters
• Space for mounting 24 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-548 distribution box.
• Designed for MT-548 panel
• Space for mounting 48 SC simplex / LC duplex adapters
• Space for mounting 48 SC simplex / LC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 12 SC duplex adapters
• Space for mounting 12 SC duplex adapters
Front panel designed for mounting in the ULTIMODE MT-524 distribution box.
• Designed for MT-524 panel
• Space for mounting 24 SC duplex adapters
• Space for mounting 24 SC duplex adapters
![Fiber Optic Mechanical Splice: ULTIMODE FAST-MS1 [5 pcs.]](https://www.dipolnet.com/img/thumbnails/l5550+.jpg/1db49b3ea49f13233b6edd5261cb36a7.jpg)
ULTIMODE FAST MS-1 mechanical splices enable permanent fibre connections to be made without the use of fibre splicers.
• Ideal for CCTV installations based on optical fibres
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
• For optical fibres with diameters of 250 μm and 900 μm
• For single mode and multimode fibres.
• Average attenuation of splices: approx. 0.15 dB
• In pack of 5 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 40 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Heat-shrinkable tubing for 0.25 mm or 0.9 mm optical fibers, used for strengthening and protecting fusion splices.
• Length 40 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
Heat shrinkable splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splice point of two optical fibres.
• Length 60 mm
• For fibres with diameters of 250 μm and 900 μm
• For fibres with diameters of 250 μm and 900 μm
Thermally shrinkable mechanical splice protector for 0.25 mm or 0.9 mm fibres. Used to reinforce and protect the splicing point of two optical fibres.
• Length 60 mm
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
• For fibers with diameters of 250 μm and 900 μm
• 100 pieces
![Protector for ULTIMODE FAST-MS1 mechanical splice [5 pcs.]](https://www.dipolnet.ro/img/thumbnails/l5559+.jpg/18ce9ebacfb9e10f3868e3fb5fc39f09.jpg)
The protective cover has been specially designed for ULTIMODE FAST MS-1 mechanical splices.
• ULTIMODE mechanical weld protector
• Small dimensions
• Set of 5 pieces
• Small dimensions
• Set of 5 pieces
The GPJ09-9401 round joint box can handle 12, 24 or 36 optical splices. It is suitable for various installation scenarios.
• IP 68
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
• Can be used in overhead systems, with telecommunication conduits etc.
• Compact size
• Space for 36 fiber optic splices
• 3 splice cassettes
• 2 input and 2 output ports
• Sealing material: self-vulcanizing rubber
The GF-KSW-8A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 12 splices and supports up to 9 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4 or 1/8 cassette type splitter
• Space for 12 splices
• Easy handling of excess fiber
• 2 input, 9 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
The GF-KSW-16A distribution frame can be used on the last mile of FTTH systems. It can terminate up to 24 splices and supports up to 18 subscriber cable outputs.
• Wall- or pole/mast-mounted distribution frame
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
• Space for 1/4, 1/8 or 1/16 cassette type splitter
• Space for 24 splices
• Easy handling of excess fiber
• 3 input, 18 output ports
• Lockable
• Additional side lock to prevent from opening
• Easy to install, operate and maintain
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/UPC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
Ultimode quick assembly connectors are suitable for terminating optical fiber cables. They are an alternative to pigtail connections.
• SC/APC type connector
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
• Suitable for installation on round cables with a diameter of 3 mm and on flat cables with a diameter of 3x2 mm
• Applicable in single-mode installations, regardless of fibre standard
• Quick and easy installation (approx. 3 minutes)
• Minimum attenuation of 0.25 dB (typically 0.5 dB)
• Reproducible connection quality results
The Ultimode Fast measure is a tool to simplify and speed up the process of earning Ultimode fast connectors on fibre optic cables.
• For Ultimode quick assembly connectors
• Measuring 250 μm and 900 μm fibers
• Faster quick assembly connector installation
• Measuring 250 μm and 900 μm fibers
• Faster quick assembly connector installation
The ULTIMODE OPM-20T-V01 optical power meter is a device used to check the attenuation of the optical path of single- and multimode fibre optic networks.
• InGaAS detector
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
• Measurement range: -70...+10 dBm
• Measurement of 8 wavelengths (850, 1270, 1300, 1310, 1490, 1550, 1577, 1625 nm)
• Universal 2.5 mm connector
• Possibility to measure relative or absolute power level
• Memory up to 500 measurements
• Reference measurement function
• Possibility to manually calibrate indications
• Built-in visual fault locator VFL 1 mW
• Network cabling tester
• Built-in LED flashlight
The TM103N L5815 optical power meter is designed to measure optical power loss in multimode and single-mode fiber-optic networks.
• Small, easy to use
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
• InGaAS detector
• 850, 1300, 1310, 1490, 1550, 1625 nm
• SC connector, FC adapter
• Possibility to measure relative or absolute power level
• Measurement range: -50...+26 dBm
• Reference measurement function
• Battery power supply 3x AAA
The TM102N-SM L5819 optical laser source is a tool necessary for measuring optical power loss in fiber-optic networks (FTTx).
• Beam generation with a wavelength of 1310 nm or 1550 nm
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
• Transmission power of -5.0 dBm
• Intuitive, simple operation
• Battery power supply 3x AAA
The TM102N-SM L5819 optical laser source is a tool necessary for attenuation measurements of optical path in networks based on multimode fibres.
• Generated wavelength: 850 nm or 1300 nm
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
• Output power: -7.0 dBm
• AUTO-OFF function when no activity is detected
• Easy to read, backlit screen
• Small size and low weight
• Simple and intuitive operation
ULTIMODE OR-20-S3S5-iSMV is a device designed for measuring and diagnosing optical fibre connections. It combines the functions of: an OTDR, optical power meter, light source and visual fault locator.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
• Reflectometer and fibre optic connection tester
• 3.5 inch screen with multi-touch function (touch screen)
• User-friendly interface similar to smartphone interface
• Measurement at 1310 nm and 1550 nm wavelengths
• Light source and power meter function for transmission measurements
• Detailed analysis of the entire optical path of up to 80 km
• Assistance in verification of events and failures: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to create measurement reports pdf/xls
OTDR ULTIMODE OR-30-S3S5S62B-iSMV is a device designed for measuring and diagnosing optical fibre connections.
• OTDR+OPM+OLS+VFL+LED
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
• Reflectometer and fibre optic connection tester
• 5-inch screen with multi-touch functionality (touchscreen)
• User-friendly interface similar to that of a smartphone
• Measurement at wavelengths 1310 nm, 1550 nm, 1625 nm
• Dynamics 32/30 dB
• Light source and power meter function for transmission measurements
• Visual VFL fault locator for basic optical line diagnostics
• Detailed analysis of the entire optical path up to 80 km long
• Assistance in verification of events and faults: broken or bent fibre, dirty connectors, bad splices, etc.
• Possibility to verify "Pass/Fail"
• Possibility to create measurement reports pdf/xls
• Function of twisted pair cable tester and copper cable identification
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
• Length: 500 m
• Connectors: SC/APC – SC/APC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – SC/UPC
• Functional case
Launch fibre designed for performing reflectometer measurements in fibre optic systems. It allows you to eliminate the OTDR's dead zone at the beginning of the measurement section.
• Single-mode G.652D fibre
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
• Length: 150 m
• Connectors: SC/APC – LC/UPC
• Functional case
The HT-C151 scissors are used to trim the excess optical fiber and aramid fibers. Hardened steel blades ensure long product life.
• Super sharp
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
• Smooth cutting of aramid fibers, braids, etc.
• Lightweight and easy to use
• Hardened steel for long life
Universal, 3-hole fibre stripper.
• Openings for 250 µm, 900 µm fibres and 2-3 mm cables
• Convenient to use
• Blade lock possible
• Convenient to use
• Blade lock possible
The Ultimode F250 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: SC, FC, ST
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
The Ultimode F125 is a tool designed for cleaning fibre optic connectors. Its design allows cleaning of both sockets and connectors.
• Cleaning of connector ferrules: LC, E2000
• Approximately 750 cleaning cycles
• Approximately 750 cleaning cycles
ULTIMODE VFL-V1-10 visual fault locator is designed to diagnose problems with fibre optic cabling.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – fixed and pulsed
Adapter 2.5 -> 1.25 mm
• Reduction 2.5 mm - > 1.25 mm
• Fits visual fault locators, meters, etc.
• Fits visual fault locators, meters, etc.
ULTIMODE VFL-V3-15 visual fault locator is designed to diagnose problems with fibre optic cabling. It emits visible light with a wavelength of 650 nm (red), which, when introduced into the fibre, escapes at excessive bends or fractures.
• Generated light with a wavelength of 650 nm
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
• Universal connector
• Compatible with multimode and single-mode fibres
• Two modes of operation – constant and pulsed
• Built-in lithium battery charged via USB-C connector
• LED flashlight
• RJ45 tester
