EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
€7.40
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €7.40 | 0 % | from 1 piece |
Available
The SFP-203/5 ULTIMODE module is used to extend the capabilities of network devices with the possibility of realising transmission via optical fibre.
• WDM transmission type (1 fibre)
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
• Single mode fibre
• Tx: 1310 nm, Rx: 1550 nm
• Transmission speed up to 1.25 Gbps
• Max. transmission distance up to 20 km
• Optical connector type: SC
• Compatible with Ultimode, TP-LINK and other devices
Details
ULTIMODE optical modules are compliant with SFP (Small Form-factor Pluggable) standard. ULTIMODE SFP-203/5G cooperates with a single-mode fiber and transmits data at speeds up to 1.25 Gb/s. This is made possible through the use of wavelength-division multiplexing (WDM) technology that multiplexes two optical carrier signals on a single optical fiber by using different wavelengths, which reduces installation costs. The maximum transmission range is 20 km.
The optical signal is transmitted in the II transmission window (1310 nm) and received in the III transmission window - 1550 nm. The complementary module to SFP-203/5G is the transceiver SFP-205/3G L1417 which transmits data in the III transmission window and receives them in the II.
This type of ULTIMODE SFP transceivers cooperates with SC connector terminating a single-mode fiber.
Gigabit (GbE) SFP modules of ULTIMODE series cooperate with media converters and majority of switches and routers with SFP slots (also with CISCO equipment) compatible with IEEE 802.3z 1000Base-FX standard. An example of media converter cooperating with such modules is M-100G/SFP L1301.
The use of media converters with the possibility of exchanging SFP modules is particularly advantageous when it comes to network configuration changes. Instead of replacing the entire unit/s, it is sufficient to exchange the SFP transceiver/s.
Key features:
- WDM transmission
- interoperability with single-mode networks
- transmission speed up to 1.25 Gbps (IEEE 802.3z 1000Base-FX)
- transmission distance of up to 20 kilometres
- optical connector type: SC
Ethernet media converter M-100G/SFP can cooperate with the following GbE SFP transceivers:
GbE ULTIMODE SFP transceivers:
| Name: | SFP-023G | SFP-2-3G | SFP-203/5G | SFP-205/3G | FP-203/5G | SFP-205/3G |
| Code: | L1405 | L1415 | L1416 | L1417 | L1418 | L1419 |
| Type of optical fiber: | multimode | single-mode | ||||
| Transmission range: | 2 km | 20 km | ||||
| Transmission speed: | 1.25 Gb/s | |||||
| Wavelength (Tx/Rx): | 1310/1310 nm | 1310/1550 nm | 1550/1310 nm | 1310/1550 nm | 1550/1310 nm | |
| Connectors: | 2x LC | 1x SC | 1x LC | |||
Specifications
| Product type | SFP module | ||
| Brand | ULTIMODE | ||
| Name | SFP-203/5G | ||
| Module type | SFP | ||
| Transmission type | WDM – 1 fiber | ||
| Fiber optic type | Single-mode | ||
| speed | MBps | 1000 | |
| connector type | SC/PC simplex | ||
| Maximum transmission range | km | 20 | |
| wavelength | Tx | nm | 1310 |
| wavelength | Rx | nm | 1550 |
| Transmitter power | dBm | -8...-3 | |
| Receiver sensitivity | dBm | > -22 | |
| Power supply | DCV | 3.3 (from SFP port) | |
| Operating temperature | °C | 0...+70 | |
