Vandal-proof Dome Camera: V-CAM 540 (550 TVL, Sony Super HAD II CCD, 0.01 lx, 4-9mm, IR)

Code: M10752
This product is no longer available
Estore: Library:



V-CAM 540 + IR is a color CCTV camera with vandal-proof housing, varifocal lens (4-9 mm), and IR illuminator.
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The included accessories
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the packaging
Distinguishing features:
  • Sony Super HDD CCD II
  • High resolution: 550 TVL
  • Varifocal lens: 4-9 mm
  • Built-in IR LEDs
  • Vandal-proof housing
The camera V-CAM 540 + IR has been equipped with superior 1/3'' CCD Super HAD II image sensor from SONY, the latest development of SONY CCD Super HAD series. SONY Super HAD II ensures significant improvement of image quality compared to the predecessor. The main advantages are better color reproduction and higher brightness of images in difficult lighting situations. Below there are images from cameras with these two types of sensors.
Comparison of images from two cameras: on the left - CCTV camera equipped with CCD SONY Super HAD; on the right - CCTV camera with CCD SONY Super HAD II. Source:
High quality SONY sensor and very good parameters (resolution of 550 TVL, sensitivity of 0.01 lx) are the reason that the V-CAM 540 + IR camera is the category winner. The built-in 4-9 mm lens allows to adjust the viewing angle from 35o to 65o. The images obtained from the camera reflect the actual colors, allow to see small details and the edges of objects are sharp. The camera is very well prepared for operation in difficult lighting conditions. Due to high sensitivity of the camera, color images are free of "snow" even in relatively low lighting.
The built-in IR illuminator allows operation even in complete darkness. It switches on automatically when light intensity falls below 3 lx, and the camera continues operation in B/W mode.
The camera is put into vandal-proof housing. The body of the housing is made of metal, the dome of polycarbonate. The components are mounted with a special wrench, which protects the camera from unauthorized access.
The camera can be mounted on a wall or ceiling (possibility of hiding the cables). The camera can be used outdoors (IP66). The device comes with two standard connectors: BNC (video) and 2.1/5.5 (power).
We also offer versions with fixed focal length (4 mm) V-CAM 515 + IR M10751 and with special bracket for mounting on a wall - V-CAM 515 + IR M10750.
Name V-CAM 540+IR
Code M10752
Image sensor
1/3” CCD SONY Super HAD II
Resolution 752x582 pixels
Sensitivity 0 lx (0.01 lx -IR off)
Lens 4-9 mm
Video resolution
550 TVL
S/N ratio
CVBS 1 Vpp / 75 Ω
Scanning interlaced
BLC yes
AGC yes
Electronic shutter
1/50 - 1/100000 s
Operating temperature range -20...+50 oC
Dimensions diam. 149x95
Power  12 VDC, 350 mA
Additional information: Housing: metal + polycarbonate.
Built-in IR illuminator
Notice! Adjusting focus or performing other work that requires dismantling of the dome, the user should pay special attention to proper pressing of rubber bush to the housing in order to protect the camera lens from the influence of the illuminator. Defective attachment of this element would cause incorrect work of the camera - overexposure of some parts of the image and bright spots.