Support

Details

VGA Extender Signal HD (VGA to IP)
General view
VGA Extender Signal HD (VGA to IP)
View of the opposite side (visible AUDIO IN/OUT connectors)
HDMI to IP Converter: Signal HD (multicast)
The included power supplies
VGA extender Signal HD allows for connecting a monitor or television with VGA input to a remote (up to 100 m) source of signal with VGA output. The video signal that can have resolution up to 1920x1080@60Hz is converted into IP stream and transmitted via cat. 5e or cat. 6 twisted pair cable. The set includes transmitter, receiver and 2 power supplies.
Key features
  • Transmission via a single Cat. 5e/6 cable
  • UDP/IP protocol (multicast)
  • Transmission of stereo sound
  • Possibility of point-to-multipoint topology
  • Supported resolutions: 1920x1080@60Hz, 1680x1050@60Hz, 1440x900@60Hz, 1360x768@60Hz, 1280x1024@60Hz, 1280x960@60Hz, 1280x720@60Hz, 1024x768@60Hz, 800x600@60Hz
  • Maximum length of transmission cable: 100 meters
IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter operating in multicast mode is about 20 Mbps. The output signal can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card.
The set is perfect for connecting remote HD source like PC or DVR/NVR with VGA output to HD-enabled TV/monitor/projector with VGA input. It requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD mount.
An application of the VGA > IP converter/extender (point-to-point)
Another application of the VGA > IP converter/extender units (point-to-multipoint)
Remark!
It is possible to change the VGA + AUDIO signals to HDMI by the application of the transmitter from the Signal HD VGA extender set and the Signal HD receiver H3615 (IP to HDMI). This way the original signals (VGA + AUDIO) transmitted over UTP cable over a distance up to 100 meters can be played on any monitor/television with HDMI input.
HDMI to IP Converter: Signal HD - Receiver (unicast)VGA Extender Signal HD (VGA to IP)
The use of the H3615 IP to HDMI receiver/converter along with the transmitter of the H3618 set

The converter/extender uses High-Definition Digital Bit Transmission Technology (HDbitT). HDbitT is a protocol used for professional delivery/transmission of high-quality image and audio over IP networks. The protocol supports video resolutions of up to 4Kx2K @ 60Hz, transmitted wirelessly or over network cables, electrical installations, optical fibers, or coaxial cables.
Specifications
Name VGA Extender Signal HD (VGA to IP)
Code H3618
Supported video formats
1920x1080@60Hz, 1680x1050@60Hz, 1440x900@60Hz, 1360x768@60Hz, 1280x1024@60Hz, 1280x960@60Hz, 1280x720@60Hz, 1024x768@60Hz, 800x600@60Hz
Max length of UTP/FTP cable (cat. 5e or higher) 100 m
Operating temperature range
-10ºC...60ºC
Audio input/output
mini JACK
Operating humidity (RH)
20%...90% (no condensation)
Dimensions 138x90x24 mm
Power 230 VAC / 5 VDC 

Specifications

Name Signal VGA to IP signal converter
Product type VGA to IP signal converter
Manufacturer SIGNAL
Interfaces
Transmitter interfaces VGA Yes
RJ-45 Yes
Receiver interfaces VGA Yes
RJ-45 Yes
Device properties
Video formats supported 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 640 × 480 @ 60 Hz, 720 × 480 @ 60 Hz, 720 × 576 @ 50 Hz, 800 × 600 @ 60 Hz, 1024 × 768 @ 60 Hz, 1280 × 1024 @ 60 Hz, 1280 × 720 @ 60 Hz, 1280 × 800 @ 60 Hz, 1440 × 900 @ 60 Hz, 1680 × 1050 @ 60 Hz, 1920 × 1080 @ 60 Hz
transmission protocol HDbitT
Max length of twisted pair cable cat. 5 m 100
cat. 5e m 100
cat. 6 m 100
cat. 6A m 100
cat. 7 m 100
Max. number of receivers 253
Device properties
Transmitter power supply VDC 5
Receiver power supply VDC 5
Dimensions mm 138 × 90 × 26
Mounting standalone
Certificates CE
Operating environment
Temperature operation -10...+60
Humidity air % 20...90