EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Support
Details
View of the isolator
Front view
View of the packaging
SV-1000 is used as an extra security device in CCTV systems and protects CCTV equipment from the following:
- lightening discharges,
- voltage differences and strokes,
- electric currents in "ground loops".
The device eliminates signal disturbances that spoil quality of transmissions over a few hundred meters. It is equipped with gain control, ranging within +/- 5 dB.
One of the problems that can be encountered during video signal transmission over distances of a few hundred meters are atmospheric lightening discharges. Even if a lightening does not directly strike the installation, the electromagnetic field that has been induced by it may cause a severe damage to an expensive DVR or other equipment connected to the network.
Other problems are caused by voltage differences between the "grounds" of various devices. This phenomenon may be observed when inserting antenna plug into a TV set or plugging in a long computer cable. The differences in voltage may be so high that the person who is plugging the TV or computer may get an electric shock. This kind of problems in CCTV systems can be solved through installation of the isolators.
Specifications
Name | Separator SV-100 |
| Code | M1711 |
| Bandwidth / Input voltage | 9 MHz / 1Vpp |
| Gain adjustment | -5 to +5 dB |
| Input/Output impedance | 75ohm |
| Transmission error | 0.75% (f=3.58 MHz, Vin=1Vpp) |
| Galvanic separation between power supply | 1000V |
| Galvanic separation | 1000V |
| DC plug | 5.5/2.1 mm |
| Dimensions | 56x120x44 mm |
| Weight | 120 g |
| Current consumption | 80mA |
| Power | 12V DC |
An example of application of the device
Another example of application of the device
In CATV or antenna networks, the users should employ the CLIS-1 R48605 isolator.