Wall Speaker Mount: Signal SB-03 (2 pcs, 15kg, tilt & swivel)

View of the mount

Sketch of the mount

Signal SB-03 E93801 mount has been designed for mounting a speaker on a wall. The maximum load capacity is 15 kg. The mount allows smooth adjustment of the position of the speaker. Additional mechanical protection with steel cable ensures full safety.

The wall has to carry the load of the speaker and mount, including a wide margin of safety.

The mount cannot be installed on walls that do not provide firm hold (steel stud, old cinder block, plaster panel etc). If you are uncertain about the nature of the wall, consult an installation company.
The set contains all components needed for typical installation. In some specific conditions there may be required auxiliary elements or tools that should be supplied by professionals installing this type of hardware.

The set includes assembly instructions. If you do not understand those directions, or have any doubts about the safety of the installation, please call a qualified installer. Improper installation may cause damage or serious injury.
Before mounting check carefully to make sure there are no missing or defective parts. If you have any doubts do not begin installation.

Improper installation may cause damage or serious injury.
Do not use this product for any other purpose than specified.
Neither the producer nor distributor shall be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.